This review of smok vape coils rpm80 mag trinity nfix kit

I have a smok nord coils cabins health for the purposes of this review.

Smok g PRIV three colors:

– PRISM chromium
– Black
– Red
– Gold Prisma

Smok-g mod locking 3 specification

– Size: 54 x 28 x 85 mm
– Chip: IQ-G chipset
– Operation: VW (standard screen, hard, Max) / TC (NI, IT, SS, TCR, heat) / Mode I
– Energy range: 1 W-230W (VW) / 10-230W (TC)
– Input voltage: 6.4V 8.4V-
– Output voltage: 0.5V-8.2V
– Battery: two cells 18650
– Cooking time: 0.001s
– Charging port: Type C
– Charging voltage: 5V
– Charging Current: 2.0A
– Standby current: <400uA
– Resistance Range: 0.1ohm-2.5ohm (VW) / 0.05ohm-2.0ohm (TC)
– temperature: 200 ° F-600 ° F / 100 ° C-315 ° C
– Display: 2.4 inch touchscreen

Smok tank tfv16 Lite Specifications:

 

– Size: 24 x 58.5mm
– Capacity: 5 ml
– Filling: Top Refill System
– Material: Stainless Steel
– Coils: conical coil best Lite Mesh TFV16: 60-75W; TFV16 Lite mesh 0.15ohm double coil, better: 60-90W
– Re: gold over 510

TFV Smok lite 16 is 24 mm and height 58.5mm this atomizer. With the atomizer is in the package, you will receive two tanks bubbles and receives two coils.
atomizer good build quality, the yarn is fine and everything is as it should be. Previously, you could see atomizer “Smok” and the bottom of the atomizer can see the “Designed by Smok”.

Using the jet is pre-installed Smok drip and spray nozzle is not compatible with standard 510 or 810 drops board would be a disadvantage for some people. Leaks are acceptable for use in my opinion.

It is the responsibility of the atomizer and atomizer can see poppers to push the top cover. Therefore, when the button is pressed, you can push the envelope and see the void filler. Fill a great void and you will have no problem to fill the tank. No leakage when the tank is filled.

This tank sprayer with glass bubbles and bubble wrap is installed, you will receive a replacement for glass tank. glass tank with a capacity of large bubbles of 5 ml capacity, in my opinion. If desired, you can buy in the release of 2 ml atomizer. I like a glass bubble and I like capabilities.

With the atomizer, you receive smok trinity alpha coils.

\

A coil is pre-installed, and the other is in the box. tfv16 Lite integrated coil bobbin and the coil mesh cone 60-75w work best, the resistance coil to 0.2ohm. receiving coils in the package is a double net tfv16 Lite coil and has the durability and work 0.15ohm 60-90w. Really can easily replace the atomizer coil you need is out of the coil and pulse Moreover, it is very simple and easy. Reels, you can see the engraved lines so you can tell me filling the tank, which is good. The first time the coil you must first few drops of liquid E and can put a coil in the tank and fill the tank used.

In the control line of air flow, it can be seen that the air flowing in both locations. In the control dial airflow, you can see some details that help regulate the air flow and a portion will be adjusted, will be the same on the other side. You can easily adjust the air flow to the atomizer.

How it works? And my mind Atomizer:

Atomizer build quiality I received was good, everything worked and the right cable. With the atomizer, you receive two rollers and two glass bubble tanks very good in my opinion. Smok Receive also installed by gout and gout standard nozzle spraying is not compatible with the 510 or 810 drops suggestion would be an idiot. Top Fill out this well and had no problem filling a void and fill quickly and easily. Capacity is very good in my opinion, and I think many will the 5ml capacity. receive spray use two coils, one coil and another network double coil wire. I tried coil mesh and decent work, good taste, but I like the tank coil Tf better, and also provide a good and excellent vapor production, this powerful steam taste. Given all busy aerosols that can be treated.

 

deficiency:

– It is compatible with the 510 or 810 drip tips

smok rpm80 pro replacement pods:

 

– The build quality is good

– facilitate filling system

– capacity of 5 ml

– Two glass bubbles tank

– Two coils

– The good taste

– dense vapor and steam production

– Easy to replace the coil

– Easy to adjust the airflow

 

smok mag mod

Smok g priv mod 3 feeding two 18650 and the subject of this formed 1-230w mod. Mod dimensions of 54 mm x 28 mm x 85 mm. mod construction quality is very good and no complaints. I really like the design of the mod, modern look very nice in my opinion, and you can buy this mod in 4 different colors. Mod has no sharp edges and mod is very convenient to use. You can also see some details about the mod, mod before, you can see “Smok” and behind the mod, you can see the “G-3 PRIV” with little information.

On the upper side of the mod, you can see the thread connection here was good and had no problem pin, silver and gold spring. This mod, you can use up to 25 mm in diameter without atomizers false.

 

On the back side of the mod, you can see the battery cover and as said device is powered by two batteries 18650 Remnants of the battery cover in place because the magnet and the remains of both situation does not play that’s good. At the bottom of the deck, you can see a small slot so you can pull nails. If the battery cover is removed, you can see the orientation of the battery in painting and also have a band here so you can make simple battery. When the battery is inserted into the mod and mod when it is not very good Sizzling stir.

From below you can see the ventilation holes MOD and USB port c.
You can use the USB port for software updates and can be used to charge your batteries for this auxiliary device load balanced. As always I recommend to charge your batteries in an external charger.

On one side of the mod you can see the shutter button. the shutter button on the device is very large and dislocation, which works very well. I like the shutter button and I think it is very convenient to use. Above the shutter button you can see the buttons used to turn on / off screen and lock / unlock the screen.

On the front you can see the mod touch screen that I really like, really big screen, 2.4inch screen size. I think this is a very good screen and the screen brightness is good.

To activate the device must click the shutter button 5 times and must do the same to turn it off. When the device is on the display mode:

– I can not
– lock and unlock
– The battery indicator
– hot
– W
– Time hojaldre
– Left and right
– coil resistance
– V
– Cons Puff

 

So, on the screen we have all the information we need and this is a big high definition screen with good brightness, because you can see everything that is good on the screen. touch screen works very well and had no problems so far.
At the entrance of the menu you can see:

– Modus
– my way
– Hojaldre
– Setting

When the selected mode, where you can see:

– Vw
Pre-heat: mild, normal, hard, at the least
watt

– Tc
Materials: Ni, Ti, ss
TCR
Preheat

 

If you choose me mode, you can set up four different operating modes, you can select a rule, pre-heat the liquid and can be written using and NIC.
If you can choose puff puff I reset the counter and can set the maximum punch.
If you choose the settings you can see:

– General (approximately factory reset, accessibility, food)
– Chip (Info)
– Theme (you can choose the color and screen timeout)
– Access codes

 

How do these devices work and my thoughts:

smok nfix kit is my opinion that another mod is very nice with Smok.

mod build quality is very good and everything is as it should be, mod feels very solid in the hand. Mod has no sharp edges and easy to use, in my opinion. I like the shutter button and in my opinion, the trigger is very convenient to use, works well for now. This model can be used up to 25 mm diameter nozzles without false. This mod is a fingerprint magnet will be a disadvantage for some people. Mod c has a load of the USB port and supports balanced than many would like, but still recommend using an external charger. The screen here is really good, size is a 2.4-inch touch screen and works very well, I have not had any problems so far. The screen brightness is also very nice and shows us a lot of information. We also have some interesting options here, we have an access code and you can choose the color on the screen.
Above the shutter button is a button that allows you to lock / unlock the screen and enable / disable screen. The battery cover is held in place perfectly and there was no play here, which is very good.
Mod now fine and had no problems with this mod.
I really like this mod and mod works mostly without any problems so far, so I can recommend this mod if you want to buy a mod touch screen.

disadvantages:

– fingerprint magnet

 

Pro:

– The quality of construction good mod
– I like the design model
– comfortable to use
– button above the shutter button
– I like the shutter button
– touch screen HD 2.4 inch
– Good display brightness
– Lots of information on the screen
– Easy to use
– The touch screen works well
– You can change the colors on the screen
– Load balancing
– Battey cover keeps perfectly in place
– My selection method
– Access code
– No ring
– tape so that you can easily remove the most battery

 

Thanks health cabin

You can buy the here: smok vape atomizer

Leave a Reply

Your email address will not be published. Required fields are marked *