Review of uwell vape caliburn pod Nunchaku Crown amulet watch 4 tank

Well I received a vapeciga caliburn pod the purposes of this review.

Well nunchaku available in several colors:

– Green Metallic
– iridescent
– Purple
– Black and Gold
– The corrosion of iron
– Black Full
– Blue sapphire

Description and features:

– Size: 27.4 mm x 94.5 mm
– Material: Stainless steel
– Power range: 5-80W
– resistance range: 0.1 ~ 3 ohm (VW), 0.1 ~ 1 ohm (TC), 0.1 ~ 0.5ohm (manual)
– Temperature range: 100 ~ 300 ° C / 200 ~ 600’F
– A new generation of E-cigarette wells control panels, making the insurance mod box tube
– Procedure: The electric mode, the TC mode (NI, SS), the bypass mode
– 18650 Battery
– Ergonomic design feels perfectly in the hand
– Pocket size when traveling
– simple interaction system,
– Micro USB port for charging

In the box:

– mod nunchaku
– USB cable
– Card Warning
– Manual

Well Vapeciga Nunchaku vape tube is fixed, powered by a battery and 18650 can operate up to 80W. In the widest part of the diameter 27.4MM mod is the height of the model is 94.5mm, but on top of the diameter is 25 mm mod.

Nunchaku is not a large tube mod mod in my opinion, has the perfect size and mod is very comfortable to wear, feels good in the hand because of the way. Nunchaku are made of stainless steel and feels very solid, the build quality is excellent and I can not complain about anything here. color quality looks good so far, so I see no scratches on the mod mod and I use it a lot. You can buy this model in several different colors, 7 colors, black. In the MoD, you can see the details, from the top of the mod, you can see the sculptures in the tube which can be seen engraved “nunchaku well.” At the top of the battery, you can see some details that helps remove the top and at the bottom you can see recorded “by the well designed”, “” and you can see the stars recorded. Personally, I think the mod beautiful, but this is very subjective.

From the top of mod, unrelated to the stainless steel spring loaded screw and plating the wire either. As a diameter of 25 mm was said above, you can be used here something sprays up to 25 mm without false.
Under mod, you can see the battery cover, the battery cover also has a good thread and can tighten or loosen the mod smoothly. At the top of the battery, you can see the four winds. A outside the battery cover can be reduced pin and spring pin. Inside, there is a pin mod and you can see very clearly marked with the red, you know how to put the battery. No isolation mode, in which case the battery is used stripes, but do not use the battery if you notice any scratches on the battery.

From the top you can see the connection and cable model is here, I have no problem with my atomizers and PIN is gold plated and spring here. This model can be used up to 26 mm diameter in the spray without proper selection for me.
Under mod have a battery cover and the battery cover, you can see some details that help when you want to open the lid of the mod. Put here is really good. If the battery cover is removed, you can see the direction of the recorded battery. As I said, this device supports 21,700, 20,700 and 18,650 batteries. Generally, you will receive an adapter to 18650 if dont’t 21,700 batteries. Personally, I really want to use the 21700 battery and think it’s great that this device compatible with battery 21700. On the back of the mod, you can see the USB port that can be used to charge the battery, and this mod support quick charge, but as usual, I suggest you use an external charger.
Before the mod, you can see the button on the screen and fire.
fire button on this unit stand out, very clicky and details that really count much in it. As the trigger works fine. The screen of this device is small, but the brightness of the screen is very good and you can see the information on the screen without any problems.

As you can see, we have no buttons and less, but we have a sensor to be used here.

In addition, the board of this Vapeciga Crown Pod is dust-proof and moisture proof is really good.

To activate it you must click five times on the fire button to turn off the mod should you do the same thing.
When the screen, you can see:

– W
– process
– coil resistance
– The battery indicator

To enter the menu you must click 3 times on the shutter button and enter the menu, you’ll see:

– Supply Mode
– TCR Mode
– Mech Mode
– The factory settings

If you want to customize your power, you need to click 3 times on the shutter button, then you should choose the power mode and after that you have to tilt the mod right to increase or left to lower wattage. Similarly, when you enter the menu by pressing the shutter button 3 times the MOD must lean left or right to scroll. Senzor works very well and once when you use, you can customize almost everything easy and uncomplicated.

Protection on these devices:

– Short-circuit protection
– Low voltage protection
– Temperature Protection
– reverse battery protection

How do these devices work and my thoughts:

Show new Caliburn Vape is an improved version of the previous model. The design of this device is similar and I like it because this mod is very comfortable to use and I really like the tube mods.

mod good building quality, feels like a very dense morning. This mod, you can use up to 26 mm diameter atomizers no more for me. the previous model is only compatible with the 18650 batteries, but they have changed and are compatible with a larger battery that is really good. Because of this mod is compatible with a larger battery is slightly larger than the previous bite. the shutter button is very nice and convenient to use and remember that the previous model E every day, I have no problem with the trigger, i belive that is also going to be very good in the future. The sensors have here works very well and really used to it quickly and once you do, you will be able to adjust quickly and smoothly. mod mod is very simple to use than many people would like. In addition, it is very good that this board mod dust and moisture resistant. So far, this model works well and remember how long I was using the model before believing that I use for a long time without any problem.
If you liked the previous version of the mod b

In the tube, you can see the shutter button, the plus and minus buttons USB port and you can see the screen.
Here hold the fire button and it’s not hard to find in a mod like vaporizer when the shutter has a statue that can be felt beneath his fingers. the shutter button works well, I have no problem with the shutter button is very sensitive and dislocation. There are fewer shoes work well, too, and I had no problems, but when the mod could move here several key toy.
In the tube there is a USB port lets you charge your battery at the Ministry of Defense, but as usual, we recommend using an external charger to charge the battery.
Basically, there display is very bright and the screen, you can see everything on the screen is very clear.

To activate the mod must click five times on the shutter button, the same as when you want to disable the mod. When “Well Hello” the Department of Defense lights appears on the screen and after that, if the power mode of the device used on the screen, you will see:

– Power
– The battery indicator
– coil resistance
– Volt

If the device is using mode control, it appears on the screen:

– temperature
– The battery indicator
– coil resistance
– Power

To enter the menu you must click 3 times on the shutter button, the menu can be seen:


– Supply Mode
– Mode Temperature Ni
– Temperature Mode Ss
– Bypass Mode
– Return to factory settings
– Exit the menu

Mod work uwell amulet vape watch get code of 5-80watts when the key roughly 0.5W watts is pressed up or down, and 80W power when the plus button and the return to 5W is pressed when the power is on and press the button 5W reduced, go to 80W.

You can lock mod really, all you have to do is press the shutter button and the minus button, you will not be able to use the mod at all until you open it with keys and reduce heat. You can also block only plus and minus buttons to do so, press the shutter button and a button you can VAPE but you can not adjust the power until the device is opened.


the entire first mod is a very good shape and feels good in your hand and if you ask me which is very convenient to use, it is difficult to find the trigger as and burning, which is a additional benefit. I like the size of a mod, mod height of only 94.5mm, which is a big plus for me, because in combination with most sprayers will be very pleasant due to the high that I can take with me mod. Mod has a very interesting feature, I can lock the device, in fact, I like it because there is no possibility that it can be enabled in your pocket, it is not really a problem to switch off device before putting it in a pocket, but it was fine, we had a key choice.
This model is powered by a battery and 18650 can not use other batteries here, you can not only use the battery to air this mod 20700.
This device works great, the fries were good and I did’t problems, so far so good. I use the power of the lower house and high strength and can not complain, it works as it should. Atomizers in a suit or 24 mm diameter of 25 mm and the Ministry of Defense, of course, can also be used sprayers beauty smaller rings.
build quality as I said very good, a good thread on top and that I will not be a problem when you want to put the battery in the mod. the shutter button and the plus and minus buttons without problems.
Basically, it is a very simple model to use, you can choose from four modes, so there is nothing complicated here and you can customize almost everything quickly.

I recommend this mod for those who like to use them a tube mods, I think it is a very good crown 4 tank click in and works as expected without problems so far.


– Unable to use the battery 20700


– The build quality is good
– Very comfortable to use
– Simple Mod, use
– the good appearance (subjective)
– Button Good
– The screen is bright
– Chip works well
– The colors look good

You can buy here:uwell vape

sourcemore thanks


Leave a Reply

Your email address will not be published. Required fields are marked *