Review of smok vape nord 2 RPM80 Pro mag trinity alpha Nfix 25W

smok nord 2 water resistant, shock, 18650 mod with TFV9 tank. Let deepen this comment Smok SCAR-18 and TFV9 and more.

These products were shipped to Smok kind of generosity for the purpose of an impartial review. other thoughts you find below are my own and are not affected by the fact that this gifted as a control sample.

Please note that this article may contain affiliate links, which helped fund the spray site Make ‘N’.

introduction
No doubt the device performance of vaporization and subjective style for me Smok SCAR-18 with the coil storage tank TFV9 kit is good research. While SCAR-battery 18 is supplied by two 18 650 and driven by the IQ-X chipset. Furthermore IP67 water and dust, and also according to the shock Smok. Another feature Smok TFV9 capacity of 6.5 ml of e-liquid and a new look. But it is Smok SCAR-18 and TFV9 without any problems? Let’s take a close look at the reviews Smok SCAR-18 and TFV9.

The contents of the box
Here is a brief summary of what you can expect to see included with kit Smok SCAR-18 and TFV9.

Smok SCAR-18
1x Smok SCAR-18 Mod
Smok TFV9 1x 6.5 ml (2 ml TPD)
2x 0.15Ω V9 Maille Coils
1x replacement glass bubbles (TPD hetero)
1x Micro USB Type B
1x user manual
packaging
laminate typical packaging Smok forward with a choice of colors for photo SCAR Smok-18 and TFV9. In addition to the characteristics of the content of the case, the main characteristics and authenticity checker. While the performance of the health warning function to normal.

Then remove the lid, revealing manual and SCAR-18 mod Smok creature in a plastic inlay. Also under the sit integration Smok V9 TFV9 with tight coil for preinstalled water. While the coil, glass and replace the USB cable to meet.

manufacturing quality
Smok Photos SCAR-18 mesh tank TFV9
side panels of bronze image SCAR-18 mod Smok
No doubt, both Smok SCAR-18 with a TFV9 kit beautiful tank, although I prefer the black version and the opinion of SCAR-P3 and P5. However, bronze matt rubber-coated finish, Smok-18 SCAR looks and feels good. marble effect handwarmer not only a lot of grip. However, because it is a bit soft, very pleasant to the touch. While SCAR-18 weighs 183.5g, weight loss is a very strong sense of mod and robustness.

Figure dashboard Smok SCAR-18

Similar to the RPM80 Pro is not present in the front edge of the plastic fairing. Furthermore, the design is very neat and key sounds are both sensitive and well positioned for easy use. In addition, the design of the LCD screen is nice and clean. But people with impaired vision may have difficulty with smaller readings. However, none of the usual color theme options to divert attention from the arrangement, which is great to see.

Although usually not the sharpest LCD Smok, SCAR-18 LCD is sharper. Of course, this makes the small screen a little easier. But in a review sample of glue residues include LCD. Although it emerges slowly, however, it is unlikely to receive the adhesive MOD covering the screen.

perhaps there will be much disappointment at the lack of load C fast USB connection. However, it is always best 18650 battery charger is primarily responsible for making the foreground.

While the vast method SCAR-P5 Smok lock with the launch of push and close the door easily. But Smok SCAR-18 covers only crisis without batteries inserted. Moreover, once the battery in the SCAR-18, the battery door was very difficult to close. The important thing is that no shot at the battery accordingly. Maybe I was not possible with the review sample, we will wait.

510 connector
Images SCAR-18 connector 510 Smok
Without doubt, SCAR Smok-18 28mm TFV9 right place. But also house a tank of 30 mm without spilling. The main center 510 Pine offers a good level of rigidity. Although the two cutting son is smooth and silky. This gives some confidence in the long-term use. In addition, the center pin seemed to cast about 2-3 mm, which is good to see.

Smok TFV9
Smok Photo Red TFV9
First embarrassing red coat on Smok TFV9 is not nearly mod, and are visually very visible. Also, if you do not care to close the lid, paint thinner and varnish can be removed completely.

pictures thread of the base and the top cover Smok TFV9
However TFV9 own outer countersink knurled control both the air ring of the flow and the top cover. While the bobbin thread and easy battery base. The top of the lid to start rigidity open and close. However, the silicone seal installed in its place immediately. In addition, it remains firmly in place with a silicone gasket, glass debris hermetically fixed without leakage.

Cut
Smok SCAR-18
The dimensions of the base to the top of Smok SCAR-18 is 88 mm in height. In addition, SCAR-18 having a width of 30.6mm and depth of 54 mm from the front rearward.

Smok TFV9

The important thing is that there are two different dimensions to smok mag. In addition to the standard version has a diameter of 28 mm and a height of 56 mm. While the release TPD has a diameter of 25.5 mm and high 50 mm.

usefulness
SCAR Smok shooting mode TC-18
Once you offer watt mode noise vaping style, Smok SCAR-18 is also equipped with temperature control. In addition to fast and easy access to adjust the nominal value ohm coils, power and TCR values ​​when the TC mode.

In addition to the strength of the SCAR-18 is to use 5 Click the shutter button. Furthermore, the 3-click mode is re vape breath counter at the end of the selection. For now, the fire and the same time the release button Watts. But for those who want to change the color of the screen, hold down the shutter button and upwards.

Variable watt – VW
Watts will likely limit set enables fine adjustment of the vaporizer experience. Especially with Smok SCAR-18 and control buttons allow the addition of 1W adjustment. Perfect for both the power output coil and balance personal preferences.

Ni TC / TC Ti / SS
After the helical coil of metal selected to adjust the temperature around the top and bottom buttons. However coils ohm (Ω) rating, strength and TCR values ​​can be adjusted by clicking the shutter button three times. Followed by pressing the shutter button to scroll to the desired option and then use the up and down arrow keys to adjust.

battery usage
Smok photo SCAR-18 support
With the performance of dual-18650 battery (not included) from Smok SCAR-18 is better than expected. Then on the screen, the battery level icon as shown in the second reproduction ratio. So similar to mobile phones. In addition to charging fees when the remaining time also shows that it is always nice to see. However, closing the battery cover with the battery inserted very difficult and does not seem to be perfect.

However, some will be disappointed with a Mini USB connection, and the level of SCAR-18 5V 1.3A max. But still, I strongly advise not to use the model for charging. The importance of something special battery charger from a reputable manufacturer will always be a safer choice.

Fill
Smok filling photo TFV9 method
Because the high-lift design and change hats. Smok TFV9 not only quick and easy to fill. But only improve the method in block / pressing the cover should not be canceled by the movement. Of course, this is a huge improvement over the TFV8. However, to start with a little too tight silicone gasket makes opening and closing stiff. However, it only lasted a few minutes, and then stored in investments.

smok trinity alpha sealing cap damage. They must stand so close.

Important precautions to be taken when the top cover is conducted in the closed position. It must also be raised when closed to prevent damage and remove paint.

Gum
Smok photos TFV9
Interestingly TFV9 fully customizable not so strong in the air flow more integrated roll of aluminum tanks on the market. Furthermore, apart from a smooth ring moves air flow control position, the remnants of a smooth vape without turbulence.

spool replacement
Photo coil replacement is Smok TFV9
A substitution, coil on coil TFV9 Smok storage tanks should be an easy case. But some of the problems suffered genuine TFV8. Also, it can be connected rolls too good for the home and outside the glass needs. allowing a better grip, but messy spool. Therefore, the coil TFV9 not be replaced while he and the remaining liquid.

But replacing and priming of the coil is a case of taking the old rolls. In addition to selecting a new reel with a few drops of e-liquid into the chimney and rolls each drill hole. near TFV9 screw spindle, and fillers. The key is to let it sit for 10-15 minutes to saturate the coil.

In general, and part of the testing process, leaving the coil is used and filled with liquid TFV9 I stood less than 24 hours. Therefore, the tank is not leaking into the coil or coils 250 flashes. Although the taste is good, more than 250 flashes intermittently flooded COIL leakage air flow hole.

Coil V9 0.15Ω Maille
Smok photograpgh V9 mesh coil 0.15Ω
No doubt V9 0.15Ω shaft to mesh coil like a champ. Also favorite fruit-flavored cola mesh coil V9 and e-liquid. In addition, because RPM coil 2 0.16Ω, exclusive fruit comes through wells. But while the coil mesh V9 0.15Ω provide softness and a little liquid before. Unfortunately, I did not bring full profile cream and flan.

Chipset and Protection
While players Smok SCAR-18 chipset experiencing IQ-X spray. In addition to IQ-X offers the following levels of protection.

Low battery (protection against surges) – the level of the battery block has dropped to a point of no return.
Ohm too low – Cutting Security.
Ohm is too high – security court.
Atomize short – cutting the coil can be blown.
protection at high temperatures, good protection of electronic cards and batteries – PCBA too hot.
Timeout 8s – Protects against accidental shootings continue.
Although there is no specific protection for USB. However, it would be reasonable to assume that there is some level of protection.

specification
Smok SCAR-18 Specification 54 * 30.6 * 88mm
Dimensions 30.6mm (W) x 54mm (D) x 88mm (T)
The power output range of 1W – 230W (VW) / 10 – 230W (TC)
an output voltage of 0.5 – 8.0V (canceled)
2x battery type and quantity of 18650
Mod frame material – zinc alloy, a layer of rubber?
0.10- 2.50Ω resistance range (VW) / 0.05 – 2.00Ω (TC)
Temperature range 100 ℃ – 315 ℃ / 200 ℉ – 600 ℉
Weight 183.5g
Smok specification TFV9
6.5 ml of the dimensions of 28 mm (diameter) x 56 mm (height)
Dimensions (TPD) 25.5 mm (diameter) x 50 mm (height)
Material Stainless steel, silicone gasket.
Weight 62 g / 65 g (PDT)
aim

SMOK Nfix Kit 25W obviously SCAR-18 and TFV9 both had a little niggle with everyone. Furthermore TFV9 suffer coil to be difficult to remove during roll changing. Furthermore TFV9 suffer from intermittent floods and leak V9 mesh coil after coil receives over 250 inhalations. The important thing the rigidity close the battery compartment of Smok-18 SCAR uncomfortable. However, this can only ask SCAR-18 I received for review.

 

summary

While Smok SCAR-18 received had a problem with the door of the battery compartment too rigid. However, it is possible that this is a stop and if it passes Smok SCAR-18 is a mod. More pleasing to the touch and feels good in the hand. In addition, it is easy to use in general manufacturing SCAR-18 mod will continue to use. Although the coil leakage V9 mesh 0.15Ω, the taste is good and good products and soft vape. How important the problem was probably caused by a leak coil and should be treated by Smok.

 

 

 

You can buy here: smok vape

https://www.vapeciga.com/collections/smok

 

Leave a Reply

Your email address will not be published. Required fields are marked *