Introduction of smok tanks nord2 pods RPM 80 mag trinity nfix

I have a smok nord2 pods health for the purposes of this review.

Smok g priv three colors:

– PRISM chromium
– Black
– Red
– Gold Prisma

Smok-g nesting specification mod 3

– Size: 54 x 28 x 85 mm
– Chip: IQ-G chipset
– Operating mode: VW (standard soft, hard, Max) / TC (NI, IT, SS, TCR, heat) / Mode I
– Power range: 1 W-230W (VW) / 10-230W (TC)
– Input voltage: 6.4V-8.4V
– Output voltage: 0.5V-8.2V
– Battery: two cells 18650
– Cooking time: 0.001s
– Charging port: Type C
– Charging voltage: 5V
– Charging Current: 2.0A
– Standby current: <400uA
– Resistance Range: 0.1ohm-2.5ohm (VW) / 0.05ohm-2.0ohm (TC)
– temperature: 200 ° F-600 ° F / 100 ° C-315 ° C
– Display: 2.4 inch touchscreen

SMOK RPM 80 Pro Lite Specifications:

– Size: 24 x 58.5mm
– Capacity: 5 ml
– Filling: System Reset Top
– Material: Stainless Steel
– Coils: conical coil best Lite Mesh TFV16: 60-75W; TFV16 Lite mesh 0.15ohm double coil, better: 60-90W
– Re: plated gold thread 510

TFV Smok lite 16 is 24 mm in diameter and 58.5mm high this atomizer. With the atomizer is in the package, you will receive two tanks bubble and receive two coils.
atomizer construction quality is good, the wire is smooth and everything is as it should be. Previous you can see atomizer “Smok” and the bottom of the atomizer can see the “Designed by Smok”.

The spray is pre-installed Smok use drip and spray nozzle standard is not compatible with cards 510 or 810 drops would be a problem for some people. Leakage is acceptable to use in my opinion.

This is the charge of the atomizer and atomizer can see buttons for biasing the top cover. So when a button is pressed, you can push the envelope and see the fill hole. Fill a great void and have no problem to fill the tank. No leakage when the tank is filled.

This spray tank is equipped with bubbles and glass bubbles preinstalled will receive a replacement glass tank. Capacity glass tank with a capacity of 5 ml of large bubbles in my opinion. If desired, you can buy in the release of the atomizer 2 ml. I liked the glass bubble and I like the ability.

With the atomizer, you receive two coils. A coil is pre-installed, and the other is in the box. tfv16 integrated mesh coil bobbin Lite and works best cone 60-75w coil, the coil resistance is 0.2ohm. receiver coils in the package is a dual coil tfv16 net Lite and has the best resistance and work 0.15ohm 60-90w. Really you can easily replace the atomizer coil you need is out of the coil and a pulse in another, very simple and easy. In the coil, you can see the engraved lines so you can tell me filling the tank, which is good. It is used the first time that the coil has to start with a few drops of liquid E and can put a coil in the tank and filling the tank.

In the air flow control dial, you can see that the air flow in both places. In the air flow control dial, you can see some details that helps adjust the air flow and how much will be adjusted, will be the same on the other. You can easily adjust the airflow into the atomizer.

How does it work? And my mind atomizer:

Atomizer build quiality I received was very good, everything worked and the correct cable. With the atomizer, you receive two rollers and two glass bubble tanks were very good for me

smok mag grip also receive a standard preinstalled drops and the spray nozzle is not compatible with the advice 510 or 810 drops would be an idiot.

Top fill out this well and have not had any problems, fills a big gap and can fill up quickly and easily. Capacity is very good in my opinion and I think many will 5ml capacity. Using spray, which receives two rollers, one coil and other networks are dual coil threads. I tried a mesh coil and decent work, good taste, but I like the tank coil Tf better, and also gives a good flavor and excellent vapor production, this very strong vapor. Given all very busy aerosol that can be treated.

drawbacks:

– It is compatible with the 510 or 810 drip tips

Pro:

– The build quality is good
– facilitate filling system
– capacity of 5 ml
– The two glass bubbles tank
– Two coils
– The good taste
– dense vapor and steam production
– Easy to replace the coil
– Easy to adjust the airflow

Smok g priv 3 mod:

smok trinity alpha tank that feeds two 18650 and objects of this mod 1-230w formed.

Mod dimensions of 54 mm x 28 mm x 85 mm. mod build quality is very good and no complaints. I really like the design of mod, modern look very nice in my opinion, and you can buy this mod in 4 different colors. Mod does not have sharp edges and mod is very comfortable to use. You can also see some details about the mod, mod ahead, you can see “Smok” and behind the mod, you can see the “G-3 PRIV” with little information.

On the upper side of the mod, you can see the connecting thread here is good and I had no problem pin, silver and gold in the spring. This model can be used up to 25 mm in diameter without false atomizers.

On the back side of the mod, you can see the battery cover and, as it says the device is powered by two batteries 18650. The remnants of the battery cover in place because of the magnet and fixed in place, n ‘there is nothing to play very well. At the bottom of the platform, you can see a small slot so you can pull nails. If the battery cover is removed, you can see the battery in the orientation painted and here we also have a group so that you can make the battery more easily. When the battery is placed in the current model is no model and excellent crackling agitation.

Sub mod can see the ventilation holes and a USB port c.
You can use the USB port for software updates and can be used to recharge the battery for a balanced load this enhancement. As always, I recommend you to charge the batteries in an external charger.

On one side of the mod, you can see the shutter button. trigger on this device is very large and dislocation, it works very well. I like the shutter button and I think it is very convenient to use. On top of the shutter button, you can see another button is used to activate / deactivate the screen lock / unlock the screen.

On the front you can see the touch screen mod really, really big screen, 2.4inch screen size. I think this is a nice screen and the brightness of the screen is good.

To activate it, you must click the trigger five times and had to do the same to turn it off. When the power mode is activated will appear:

– I can not
– locking / unlocking
– The battery indicator
– Heat
– W
– a puff
– Left and right
– Resistance Coil
– V
– against stroke

Thus, on the screen, we have all the necessary information and it is a big high definition screen with good brightness, because you can see everything that is good on the screen. The touch screen works very well and did not have any issues.
In the Insert menu, you can see:

– Modus
– My Style
– Hojaldre
– Settings

After selecting the mode in which you can see:

– Vw
Heat: soft, standard, high, max
watt

– Tc
Ingredients: o, t, ss
TCR
Preheat

If you choose me mode, you can set up four different operating modes, you can select a rule, the heating fluid and may be written and network cards.
Choosing puff puff, you can rearrange the tables and can set the maximum drag.
If you choose the settings you can see:

– General (of the factory, accessibility, food)
– Chip (Info)
– Theme (you can choose the color and screen timeout)
– Access codes

How do these devices work and my thoughts:

G 3 PRIV is my opinion that another mod is very nice with smok nfix pods build quality is very good and everything is as it should be, feels very solid in the hand model.

Mod has no sharp edges and convenient to use in my opinion. I like the trigger and the trigger in my opinion is very comfortable to use, smooth now. This model can be used up to 25 mm diameter without false atomizers. This mod is a fingerprint magnet would be a disadvantage for some people. Mod USB port and the balance of support costs c much needed, but as usual, I recommend using an external charger. Here, the screen is very good, is the size of the display of 2.4-inch touch screen and it works great, I have not had any problems so far. The screen brightness is also very nice and the screen, we have a lot of information. We also have some interesting options here, we have the access code and can choose the color on the screen.
Above the shutter button, there is a button that allows you to lock / unlock the screen and enable / disable the screen. The battery cover is still perfectly in place and no play here, which is very good.
Mod is now very well and had no problem with this mod.
I really like this mod and mod work largely without problems so far, so I recommend this mod if you want to buy a mod touch screen.

deficiency:

– fingerprint magnet

Pro:

– Quality of building a good mod
– I like the mod design
– comfortable to use
– button located above the shutter button
– I like the shutter button
– 2.4 inch HD touch screen
– Good display brightness
– Much of the information on the screen
– Easy to use
– The touch screen works well
– You can change the colors on the screen
– balanced load
– Battey is the perfect cover up
– My selection method
– Access codes
– No ring
– tape so that you can easily remove the most battery

Thank you health cabin

You can buy the smok tanks here: https://www.vapeciga.com/collections/smok

Leave a Reply

Your email address will not be published. Required fields are marked *