Comprehensive solution to the Vape market in Japan

In 2018, the Japanese vape ijoy mesh  market reached 1.2 billion U.S. dollars, and the compound annual growth rate for 2019-2024 is expected to be 22.6%. Factors driving market growth include manufacturers’ increasing product innovation, promoting demand for smoke-free and ash-free steam, and focusing on mitigating health risks in Japan.

By region, Kanto had the largest share of the Japanese vape market in 2018. The increase in the number of new users and ex-smokers has promoted the development of the vape market in the region. It is also the most urbanized region in Japan, and some major cities including Tokyo, Chiba and Kanagawa have all contributed to the growth of the vape market.

According to sales channels, the vape market in Japan is divided into vape shops, tobacco shops, supermarkets/supermarkets, online and others. Others include convenience stores, gas stations, vending machines, pharmacies, and general stores. Among them, online channels are expected to surpass tobacco companies in 2024 and become the largest distribution channel. There are relatively few obstacles to establishing a new online business, and it is considered the best platform to meet consumer needs. In addition, discounts offered by online merchants such as Rakuten and Amazon Japan are considered to dreamer mod be key factors for consumers to switch to online channels to purchase vape.

The Japanese vape market is divided into men and women by gender. Among them, male consumers accounted for a larger share of the Japanese vape market in 2018. For most female consumers in the region, tobacco liquid consumption is still a taboo, and this trend has affected the use of vape by women.
Japan vape market dynamics

Growth is the driving force The smoke produced by burning tobacco is equally harmful to humans and the environment. Vape eliminates the emission of smoke, on the contrary, the smoke produced is easily dissolved in the air within a few seconds. This greatly reduces the side effects of smoking. Since vape does not produce smoke and soot, it can be used in places where traditional cigarettes are harmful to health and smoking is prohibited. Because of this, smoke-free and smoke-free vape is driving the vape market in this country dovpo topside vape.

trend
The introduction of various vapes and electronic vapor devices on the market has had a significant impact on consumers’ smoking attitudes. Vape is increasingly affecting the lifestyles of smokers and ex-smokers. Compared with combustible cigarettes, vape has less negative health effects, which is the main reason for consumers to use smok vape pen. Therefore, vape manufacturers are rapidly opening retail stores and vape shops to promote their products to cater to the changing lifestyle preferences of consumers in the vape market.

opportunity
With the rapid increase in the number of tobacco addicted consumers in Japan, vape is becoming more and more valuable as an alternative to traditional tobacco smoke. Tobacco companies are shifting from traditional tobacco products to next-generation vapor electronic devices, because more and more people, especially young people, have serious health concerns due to smoking. The focus is to replace traditional tobacco cigarettes and provide healthier, less chemical vape technology. The Japanese vape market is expected to achieve tremendous growth during the forecast period.

The competitive landscape of the Japanese vape market

The Japanese vape market is fiercely competitive, with companies such as Philip Morris International Inc., Japan Tobacco Inc., British American Tobacco plc and Imperial Brands plc Apv vv mod. Is the main participant. These participants participate in mergers and acquisitions, and launch products to increase their market share.

Philip Morris International, British American Tobacco. , Altria Group Co., Ltd., Japan Tobacco Co., Ltd., Empire Brand Co, Ltd., JUUL Labs Co., Ltd., Shenzhen iSmoka Electronics Co., Ltd., Shenzhen IVPS Technology Co., Ltd., Innokin Technology Co., Ltd., Shenzhen Conger Technology Co., Ltd., Pax Labs Co., Ltd. The company is a major player in the Japanese vape market.

Review of smok vape nord 2 RPM80 Pro mag trinity alpha Nfix 25W

smok nord 2 water resistant, shock, 18650 mod with TFV9 tank. Let deepen this comment Smok SCAR-18 and TFV9 and more.

These products were shipped to Smok kind of generosity for the purpose of an impartial review. other thoughts you find below are my own and are not affected by the fact that this gifted as a control sample.

Please note that this article may contain affiliate links, which helped fund the spray site Make ‘N’.

introduction
No doubt the device performance of vaporization and subjective style for me Smok SCAR-18 with the coil storage tank TFV9 kit is good research. While SCAR-battery 18 is supplied by two 18 650 and driven by the IQ-X chipset. Furthermore IP67 water and dust, and also according to the shock Smok. Another feature Smok TFV9 capacity of 6.5 ml of e-liquid and a new look. But it is Smok SCAR-18 and TFV9 without any problems? Let’s take a close look at the reviews Smok SCAR-18 and TFV9.

The contents of the box
Here is a brief summary of what you can expect to see included with kit Smok SCAR-18 and TFV9.

Smok SCAR-18
1x Smok SCAR-18 Mod
Smok TFV9 1x 6.5 ml (2 ml TPD)
2x 0.15Ω V9 Maille Coils
1x replacement glass bubbles (TPD hetero)
1x Micro USB Type B
1x user manual
packaging
laminate typical packaging Smok forward with a choice of colors for photo SCAR Smok-18 and TFV9. In addition to the characteristics of the content of the case, the main characteristics and authenticity checker. While the performance of the health warning function to normal.

Then remove the lid, revealing manual and SCAR-18 mod Smok creature in a plastic inlay. Also under the sit integration Smok V9 TFV9 with tight coil for preinstalled water. While the coil, glass and replace the USB cable to meet.

manufacturing quality
Smok Photos SCAR-18 mesh tank TFV9
side panels of bronze image SCAR-18 mod Smok
No doubt, both Smok SCAR-18 with a TFV9 kit beautiful tank, although I prefer the black version and the opinion of SCAR-P3 and P5. However, bronze matt rubber-coated finish, Smok-18 SCAR looks and feels good. marble effect handwarmer not only a lot of grip. However, because it is a bit soft, very pleasant to the touch. While SCAR-18 weighs 183.5g, weight loss is a very strong sense of mod and robustness.

Figure dashboard Smok SCAR-18

Similar to the RPM80 Pro is not present in the front edge of the plastic fairing. Furthermore, the design is very neat and key sounds are both sensitive and well positioned for easy use. In addition, the design of the LCD screen is nice and clean. But people with impaired vision may have difficulty with smaller readings. However, none of the usual color theme options to divert attention from the arrangement, which is great to see.

Although usually not the sharpest LCD Smok, SCAR-18 LCD is sharper. Of course, this makes the small screen a little easier. But in a review sample of glue residues include LCD. Although it emerges slowly, however, it is unlikely to receive the adhesive MOD covering the screen.

perhaps there will be much disappointment at the lack of load C fast USB connection. However, it is always best 18650 battery charger is primarily responsible for making the foreground.

While the vast method SCAR-P5 Smok lock with the launch of push and close the door easily. But Smok SCAR-18 covers only crisis without batteries inserted. Moreover, once the battery in the SCAR-18, the battery door was very difficult to close. The important thing is that no shot at the battery accordingly. Maybe I was not possible with the review sample, we will wait.

510 connector
Images SCAR-18 connector 510 Smok
Without doubt, SCAR Smok-18 28mm TFV9 right place. But also house a tank of 30 mm without spilling. The main center 510 Pine offers a good level of rigidity. Although the two cutting son is smooth and silky. This gives some confidence in the long-term use. In addition, the center pin seemed to cast about 2-3 mm, which is good to see.

Smok TFV9
Smok Photo Red TFV9
First embarrassing red coat on Smok TFV9 is not nearly mod, and are visually very visible. Also, if you do not care to close the lid, paint thinner and varnish can be removed completely.

pictures thread of the base and the top cover Smok TFV9
However TFV9 own outer countersink knurled control both the air ring of the flow and the top cover. While the bobbin thread and easy battery base. The top of the lid to start rigidity open and close. However, the silicone seal installed in its place immediately. In addition, it remains firmly in place with a silicone gasket, glass debris hermetically fixed without leakage.

Cut
Smok SCAR-18
The dimensions of the base to the top of Smok SCAR-18 is 88 mm in height. In addition, SCAR-18 having a width of 30.6mm and depth of 54 mm from the front rearward.

Smok TFV9

The important thing is that there are two different dimensions to smok mag. In addition to the standard version has a diameter of 28 mm and a height of 56 mm. While the release TPD has a diameter of 25.5 mm and high 50 mm.

usefulness
SCAR Smok shooting mode TC-18
Once you offer watt mode noise vaping style, Smok SCAR-18 is also equipped with temperature control. In addition to fast and easy access to adjust the nominal value ohm coils, power and TCR values ​​when the TC mode.

In addition to the strength of the SCAR-18 is to use 5 Click the shutter button. Furthermore, the 3-click mode is re vape breath counter at the end of the selection. For now, the fire and the same time the release button Watts. But for those who want to change the color of the screen, hold down the shutter button and upwards.

Variable watt – VW
Watts will likely limit set enables fine adjustment of the vaporizer experience. Especially with Smok SCAR-18 and control buttons allow the addition of 1W adjustment. Perfect for both the power output coil and balance personal preferences.

Ni TC / TC Ti / SS
After the helical coil of metal selected to adjust the temperature around the top and bottom buttons. However coils ohm (Ω) rating, strength and TCR values ​​can be adjusted by clicking the shutter button three times. Followed by pressing the shutter button to scroll to the desired option and then use the up and down arrow keys to adjust.

battery usage
Smok photo SCAR-18 support
With the performance of dual-18650 battery (not included) from Smok SCAR-18 is better than expected. Then on the screen, the battery level icon as shown in the second reproduction ratio. So similar to mobile phones. In addition to charging fees when the remaining time also shows that it is always nice to see. However, closing the battery cover with the battery inserted very difficult and does not seem to be perfect.

However, some will be disappointed with a Mini USB connection, and the level of SCAR-18 5V 1.3A max. But still, I strongly advise not to use the model for charging. The importance of something special battery charger from a reputable manufacturer will always be a safer choice.

Fill
Smok filling photo TFV9 method
Because the high-lift design and change hats. Smok TFV9 not only quick and easy to fill. But only improve the method in block / pressing the cover should not be canceled by the movement. Of course, this is a huge improvement over the TFV8. However, to start with a little too tight silicone gasket makes opening and closing stiff. However, it only lasted a few minutes, and then stored in investments.

smok trinity alpha sealing cap damage. They must stand so close.

Important precautions to be taken when the top cover is conducted in the closed position. It must also be raised when closed to prevent damage and remove paint.

Gum
Smok photos TFV9
Interestingly TFV9 fully customizable not so strong in the air flow more integrated roll of aluminum tanks on the market. Furthermore, apart from a smooth ring moves air flow control position, the remnants of a smooth vape without turbulence.

spool replacement
Photo coil replacement is Smok TFV9
A substitution, coil on coil TFV9 Smok storage tanks should be an easy case. But some of the problems suffered genuine TFV8. Also, it can be connected rolls too good for the home and outside the glass needs. allowing a better grip, but messy spool. Therefore, the coil TFV9 not be replaced while he and the remaining liquid.

But replacing and priming of the coil is a case of taking the old rolls. In addition to selecting a new reel with a few drops of e-liquid into the chimney and rolls each drill hole. near TFV9 screw spindle, and fillers. The key is to let it sit for 10-15 minutes to saturate the coil.

In general, and part of the testing process, leaving the coil is used and filled with liquid TFV9 I stood less than 24 hours. Therefore, the tank is not leaking into the coil or coils 250 flashes. Although the taste is good, more than 250 flashes intermittently flooded COIL leakage air flow hole.

Coil V9 0.15Ω Maille
Smok photograpgh V9 mesh coil 0.15Ω
No doubt V9 0.15Ω shaft to mesh coil like a champ. Also favorite fruit-flavored cola mesh coil V9 and e-liquid. In addition, because RPM coil 2 0.16Ω, exclusive fruit comes through wells. But while the coil mesh V9 0.15Ω provide softness and a little liquid before. Unfortunately, I did not bring full profile cream and flan.

Chipset and Protection
While players Smok SCAR-18 chipset experiencing IQ-X spray. In addition to IQ-X offers the following levels of protection.

Low battery (protection against surges) – the level of the battery block has dropped to a point of no return.
Ohm too low – Cutting Security.
Ohm is too high – security court.
Atomize short – cutting the coil can be blown.
protection at high temperatures, good protection of electronic cards and batteries – PCBA too hot.
Timeout 8s – Protects against accidental shootings continue.
Although there is no specific protection for USB. However, it would be reasonable to assume that there is some level of protection.

specification
Smok SCAR-18 Specification 54 * 30.6 * 88mm
Dimensions 30.6mm (W) x 54mm (D) x 88mm (T)
The power output range of 1W – 230W (VW) / 10 – 230W (TC)
an output voltage of 0.5 – 8.0V (canceled)
2x battery type and quantity of 18650
Mod frame material – zinc alloy, a layer of rubber?
0.10- 2.50Ω resistance range (VW) / 0.05 – 2.00Ω (TC)
Temperature range 100 ℃ – 315 ℃ / 200 ℉ – 600 ℉
Weight 183.5g
Smok specification TFV9
6.5 ml of the dimensions of 28 mm (diameter) x 56 mm (height)
Dimensions (TPD) 25.5 mm (diameter) x 50 mm (height)
Material Stainless steel, silicone gasket.
Weight 62 g / 65 g (PDT)
aim

SMOK Nfix Kit 25W obviously SCAR-18 and TFV9 both had a little niggle with everyone. Furthermore TFV9 suffer coil to be difficult to remove during roll changing. Furthermore TFV9 suffer from intermittent floods and leak V9 mesh coil after coil receives over 250 inhalations. The important thing the rigidity close the battery compartment of Smok-18 SCAR uncomfortable. However, this can only ask SCAR-18 I received for review.

 

summary

While Smok SCAR-18 received had a problem with the door of the battery compartment too rigid. However, it is possible that this is a stop and if it passes Smok SCAR-18 is a mod. More pleasing to the touch and feels good in the hand. In addition, it is easy to use in general manufacturing SCAR-18 mod will continue to use. Although the coil leakage V9 mesh 0.15Ω, the taste is good and good products and soft vape. How important the problem was probably caused by a leak coil and should be treated by Smok.

 

 

 

You can buy here: smok vape

https://www.vapeciga.com/collections/smok

 

smok atomizer nord rpm80 pods mag mod alpha coils nfix kit comment

smok nord coils come in several different colors:

– Blue red
– black Amarillo
– Black red
– Black Silver
– Red Gold
– Red
– 7 colors

In the package:

– Poison MOD
– Deposit TFV8 Big Baby Light Edition (5 ml)
– Basic Baby-Q2 V8 (double coil 0.4ohm) (pre-installed)
– Baby-T8 base V8 (0.15ohm eight rolls)
– replacement of the glass tube
– 6 pairs of colors O-ring
– USB Cable
– User’s guide
– Room
– Warranty card
– Warning Card
– Beauty 2 rings

smok rpm80 pro replacement pods is a very nice and clear designed device with a great edition tfv8 baby looks good atomizer

a design very attractive with many details, especially in this device model is very different brands. The most interesting is that the mod atomize and we can see a lot of LED lights. It is even possible to change the color of the lights, but we’ll talk soon.

In the picture, a lot is obtained, you will receive babies edition mod poison tfv8 light, two coils and everything you need, but also in the package you receive or ring that can be used to change the color of the LED light of the atomizer and two rings of beauty, again, a very nice together.
I received this kit in 7 colors, this is subjective, but I like the way it looks, of course, you can buy this product in different color options.
the build quality is very good, everything is as it should be. color quality is also very good, Smok improved and so far I do not see a scratch at the Ministry of Defense or spray and use it every day at home and away from me, for now everything is fine.

Light edition the baby fans Tfv8

the atomizer diameter was 24.5 mm, a height of 56 mm and a weight of 60 g. Atomized steel is fly.

Atomizer is tfv8 baby is great, but a little different, this one is lighter and has brought the matter to light, so that when the spray shine spray. In the atomizer, led by a white light, but if you want to change the color of light that can be used or the sound package and change. For example, if the O-ring is replaced blue when blue aerosol spray brightness. Build quality is very good, very good thread, and can not say anything about the poor quality of construction.

In addition to the atomizer there is extreme oscillation with two O-rings therein. Council to fall very good early fall. Top real point of dripping, the magnitude of the falling edge: The height is 19 mm and 15 mm, I think it is convenient to use.

Under the Advanced drop drop, you can see the hat is a filling upper spray. This filling is very popular and very easy to use. All you need to do is push the envelope and see a hole where the tank is filled, can fill, I love him very quickly.
In the upper cover, it can be recorded “Smok” and can see the information recorded using unscrewing plug to change reel or for cleaning the sprayer.

And a base set fire very good and clean. From the bottom of the base, you can see engraved “Designed by Smok”.

Basically, you can see the air flow control ring in the ring and you can also view the same details as in the upper deck and details of help when you want to adjust the air flow . Good air flow ring can regulate the flow of air is very accurate and can not be moved occasionally. stop air flow ring and can not run forever, I want to see the top of the atomizer. The vaporizer has two holes on both sides of the air flow and held in one hand, it will be the same on the other side. the soft and hard airflow.

5ml the capacity of the tank, but the rules of the European Union, you can buy a 2 ml reservoir. It can be purchased separately for the atomizer glass bubbles and capacity will 7ml glass. I like that it is possible to extend the capacity of the atomizer. There is no glass bubble in the package, but you will get a glass a backup if you do not follow these. Or two rings have the tank properly.

Generally, you will also receive two coils. A coil is a baby Q2 core v8, resistance is 0.4ohm coil and the coil is installed, power is recommended for this 40-80w coil, but it would be better to use between 55-65w. Another coil that receives the V8-T8 baby packet core and coil resistance is 0.15ohm 50-110w the recommended strength to the coil, but it would be better to use between 60-80w.
I always like to say, before filling the tank and spray, you must first coil first with a few drops of liquid, and then fill the tank and ready to vape drying without success.

Edition big baby Tvf8 throw light works very well, either by mail exhaust fluid (vg-pg 70-30), so there is no leak, there is actually no problem with this atomizer all. steam production is very good with this tank, you can definitely enjoy if you want to chase the clouds. It feels so good, can not say anything bad taste.

smok mag mod

This mod is a dual mod 18,650 and you can see the LED lights are beautiful and you can change the color of the light.

Specification:

power range: 1-225w
Size: 86 mm x 47 mm x 30 mm
Weight: 180 g
Resistance Range: 0.1-2.5ohm (VW) /0.05-2.0ohm (TC)
Temperature range: 200F-600F / 100C-315C

Is shaped device is very nice and I like the way it feels in your hand.
At the top of the camera, you can see a gold plated spring pin 510. On the device, you can see many beautiful details and many LED lights, you can see two savory details engraved on one side you can see engraved “Smok” On the other hand you can see engraved “poison”.

This device has a lateral-shaped button that calls are very nice and want to use the device with the power button placed on the side. shutter button is also very large, but can be enabled if the top is pressed. Anyway, it was very comfortable and the shutter button can be touched with a finger or the palm, it all depends on how the shutter button is pressed. shutter button works well. Below the screen you can see the plus and minus buttons, very clicky button.

In this device, you can see the USB port, you can use this USB port to charge the battery or upgrade the software. smok balance for charging, so you can charge your batteries here, but as usual, I suggest you use an external charger.

From the bottom of the camera, you can see the top of the battery, which lasts not open the door, I love the fact that the battery cover, you can see very clearly how you have to put the battery. The battery cover is a great place when safely inside, the door can not accidentally open the battery. You can not hear a sound when the device is shaken.

smok trinity alpha coils has a color screen is very large and beautiful, the screen size is 1 inch. The screen brightness is good and you can see everything very nice.

To activate the device, you must press the shutter button 5 times. After that, you will see “Smok” on the screen and you will see a version of the software.

When the camera is activated, you will see on the screen:

– Dual battery indicator
– power (W)
– voltage
– Resistance Coil
– hot
– against stroke
– a puff

Thus, on the screen, you will see a lot of information, and if you ask me, is all you need, I have to say I like the battery indicator on the screen.

When the shutter button is pressed three times the device will be on the menu, and the menu can be seen:

– Mode settings
– Puff formation
– Display Settings
– LED
– Deadly

To navigate the menu using the shutter button and the plus and minus buttons. If you want to enter a submenu fire button is pressed long.

You can use the setting mode to choose the mode of work:

– Power mod
– Ni Tc
– Te Ti
– TC SS
– Memory Game

Now, for example, if you want to change the settings in the power mode, you must click 3 times on the shutter button and select watts and hold the shutter button, you can adjust the power and shine, of course, you can adjust the power on the main screen with the plus and minus button.
From the menu, you can also reset puff on, or you can set the meter limit.
You can change the display color and display time. These devices have 6 colors available, you can choose from blue, pink, orange, red, white or green.
Then you can change the color of the LED lights and can also change the style of light. You can choose from 12 colors are available in the photo you can see the colors.
As I said, you can change the style of light and you can choose between normal mode, flash and style faded.
You can also choose when the LED light is shining, you can light up when vaping, when the screen is on, or can be set to shine all the time. Of course, you can turn off the lights.
To turn off, you need to go to the menu and you have to find another option a little practice.

When the device is activated by 5 Click and locked when the shutter button is locked, you can not use the device.
Every time you change the atomizer, asking whether new or old coil and see the resistance of the coil before and a new reel.

smok nfix kit  worked very well within the chip is very nice and it was pretty accurate, I can not say a bad thing, as good quality. The screen is bright and big and I love it. Honestly, I want to use this mod with LED lights off, but I think people will love the features, looks good and interesting, sometimes I turn on the light and I admit, it looks amazing. I also like the fact that you can turn off the LED light, so if you like the features you will use if you do not like, you can always turn it off, but you can not turn off the LED lights inside the atomizer. If the LED lights as surely love this mod.

Another advantage is that the balance in favor of charging models. In this device, you can manage all mod has so many good features, even more than necessary, this is a great advantage. This device is very suitable for dual battery model and I really like the side of the shutter button.

 

As we all know, is Smok a company that now manufactures high quality equipment and is also atomiser does not disappoint and this mod chip is very good, in my opinion, this is a very good tool.

 

You can buy it here: smok vape atomizer

https://www.vapeciga.com/collections/smok

 

smok vaporizers nord2 rpm80 225w trinity alpha nfix coils comment

smok nord2 kit come in several different colors:

 

– Blue red

– black Amarillo

– Black red

– Silver Black

– Red Gold

– crimson

– 7 colors

 

In the package:

 

– Poison MOD

– Deposit TFV8 Big Baby Light Edition (5 ml)

– Basic Baby-Q2 V8 (double coil 0.4ohm) (pre-installed)

– Baby-T8 base V8 (0.15ohm eight rolls)

– glass tubes replacement

– 6 color pairs of O-ring

– USB Cable

– User’s Guide

– Bedrooms

– Warranty card

– Warning Card

– Beauty 2 rings

The rpm80 pro battery is a very nice and clear designed device with a great edition tfv8 baby looks good atomizer.

a very attractive design with many details, especially in these very different brands of model aircraft. The most interesting thing is that the mod atomize and we could see a lot of LED lights. It is even possible to change the color of the lights, but we’ll talk.

In the box, you get a lot, you will receive a baby tfv8 mod edition light Poison, two coils and all you need, but also in the package you receive or rings that can be used to change the color of LED lights the atomizer and two beauty rings, again, all very nice.
I received this kit in 7 colors, this is subjective, but I like the way it looks, of course, you can buy this product in different colors.
the build quality is good, everything is as it should be. color quality is also very good, Smok improved and so far I see no scratches on the mod or spray and use it every day at home and out of me, for now all is well .

Baby light edition of Tfv8 fan

atomizer diameter was 24.5 mm, height 56 ​​mm and weighs 60 g. Atomized is steel fly.

Baby atomizer tfv8 is large, but somewhat different, the latter is lighter and has brought this to light, so that when spraying the spray shine. In the atomizer, which is led by a white light, but if you want to change the color of light that can be used or fixed ring and change. For example, if you replace the blue O-ring, when spraying aerosol blue light. The build quality is very good, very good thread, and can not say anything about the poor quality of construction.

In addition, there is an extreme swing atomizer with two O-ring on it. Council dripping excellent start. Point real highlight DRIP, the magnitude of the falling edge: the height is 19 mm and 15 mm, I think it is convenient to use.

sophisticated drops below, you can see the spray cap fills. Top filling is very popular and very easy to use. All you need to do is push the envelope and see the hole where the tank is filled, you can fill very quickly, I liked.
In the top cover, you can watch the folder “Smok” and can view details recorded unscrewing the cap holder to change the coil or for cleaning the sprayer.

Setting fire and a very good base and clean. From the bottom of the base, you can see engraved “Designed by Smok”.
Basically, you can see the air flow control ring in the ring and you can also view the same details as in the upper deck and details of help when you want to adjust the air flow . Good air flow ring can regulate the flow of air is very accurate and can not be moved occasionally. stop air flow ring and can not run forever, I want to see the top of the atomizer. The vaporizer has two holes on both sides of the air flow and held in one hand, it will be the same on the other side. the soft and hard airflow.

5ml the capacity of the tank, but the rules of the European Union, you can buy a 2 ml reservoir. It can be purchased separately for the atomizer glass bubbles and capacity will 7ml glass. I like that it is possible to extend the capacity of the atomizer. There is no glass bubble in the package, but you will get a glass a backup if you do not follow these. Or two rings have the tank properly.

Generally, you will also receive two coils. A coil is smok mag 225W, coil resistance is 0.4ohm and this coil is installed, power is recommended for this coil 40-80w, but it would be better to use between 55-65w. Another coil that will receive the core package V8 baby-T8 and resistance of the coil is 0.15ohm the 50-110w force recommended to the coil, but it would be better to use between 60-80w.

I always like to say, before filling the tank and vaporizer, you must first prime coil with a few drops of liquid, and then fill the tank and ready to spray drying without success.

Baby Edition Tvf8 light spray of the work very well, either by evacuation mail liquid (vg-pg 70-30), so there is no leakage, there is actually no problem with this atomizer at all. steam production is very good with this tank, you can definitely enjoy if you want to chase the clouds. It feels so good, you can not say something bad taste.

poison mod Smok

This mod is a dual mod 18,650 and you can see the LED lights are beautiful and you can change the color of the light.

Specification:

power range: 1-225w
Size: 86 mm x 47 mm x 30 mm
Weight: 180 g
Resistance Range: 0.1-2.5ohm (VW) /0.05-2.0ohm (TC)
Temperature range: 200F-600F / 100C-315C

Is shaped device is very nice and I like the way it feels in your hand.
At the top of the camera, you can see a gold plated spring pin 510. On the device, you can see many beautiful details and many LED lights, you can see two savory details engraved on one side you can see engraved “Smok” On the other hand you can see engraved “poison”.

This device has a lateral-shaped button that calls are very nice and want to use the device with the power button placed on the side. shutter button is also very large, but can be enabled if the top is pressed. Anyway, it was very comfortable and the shutter button can be touched with a finger or the palm, it all depends on how the shutter button is pressed. shutter button works well. Below the screen you can see the plus and minus buttons, very clicky button.

In this device, you can see the USB port, you can use this USB port to charge the battery or upgrade the software. smok balance for charging, so you can charge your batteries here, but as usual, I suggest you use an external charger.

From the bottom of the camera, you can see the top of the battery, which lasts not open the door, I love the fact that the battery cover, you can see very clearly how you have to put the battery. The battery cover is a great place when safely inside, the door can not accidentally open the battery. You can not hear a sound when the device is shaken.

smok trinity alpha price has a color screen is very large and beautiful, the screen size is 1 inch. The screen brightness is good and you can see everything very nice.

To activate the device, you must press the shutter button 5 times. After that, you will see “Smok” on the screen and you will see a version of the software.

When the device is activated, you will see on the screen:

– double the battery indicator
– Power (W)
– voltage
– coil resistance
– hot
– blow
– Time hojaldre

Thus, on the screen, you will see a lot of information, and if you ask me, is all you need, I must say I like the battery indicator on the screen.

When the shutter button is pressed three times the device will be on the menu and the menu can be seen:

– Mode settings
– the formation of the breath
– Configuration Screen
– diodes
– Deadly

To navigate the menu using the shutter button and the plus and minus buttons. To enter a submenu button is pressed much fire.

You can use the setting mode to choose the work mode:

– Power mod
– Ni Tc
– Te Ti
– TC SS
– Memory game

Now, for example, if you want to change the settings in the power mode, you must click 3 times on the shutter button and select watts and hold the button for the shutter, you can adjust the power and quality, of course, you can adjust the power on the main screen with the plus and minus button.
From the menu, you can also reset counters puff pastry, or you can set the meter.
You can change the color of the time display and screen. These devices have 6 colors available, you can choose from blue, pink, orange, red, white or green.
Then you can change the color of the LED lights and can also change the style of light. You can choose from 12 colors are available in the picture you can see the colors.
As I said, you can change the style of light and you can choose between normal mode, the flash and faded style.
You can also choose when the twinkling lights LED brightness can be punished when vaping, when the screen is on, or can be configured to shine all the time. Of course, you can turn off the lights.
To disable it, you go to the menu and you have to find another option for a bit unusual.

When the device is activated, with 5 Click and locked when the shutter button is locked, you can not use the device.
Each time you change the atomizer, you are asked whether new or old reels and see the coil resistance before and a new coil.

smok nfix coils worked very well within the chip is very nice and it was pretty accurate, I can not say a bad thing, as good quality. The screen is bright and big and I love it. Honestly, I want to use this mod with LED lights off, but I think people will love the features, looks good and interesting, sometimes I turn on the light and I admit, it looks amazing. I also like the fact that you can turn off the LED light, so if you like the features you will use if you do not like, you can always turn it off, but you can not turn off the LED lights inside the atomizer. If the LED lights as surely love this mod.

Another advantage is that the balance in favor of charging models. In this device, you can manage all mod has so many good features, even more than necessary, this is a great advantage. This device is very suitable for dual battery model and I really like the side of the shutter button.

 

As we all know, is Smok a company that now manufactures high quality equipment and is also atomiser does not disappoint and this mod chip is very good, in my opinion, this is a very good tool.

 

You can buy smok vaporizers here: https://www.vapeciga.com/collections/smok

 

Introduction of smok tanks nord2 pods RPM 80 mag trinity nfix

I have a smok nord2 pods health for the purposes of this review.

Smok g priv three colors:

– PRISM chromium
– Black
– Red
– Gold Prisma

Smok-g nesting specification mod 3

– Size: 54 x 28 x 85 mm
– Chip: IQ-G chipset
– Operating mode: VW (standard soft, hard, Max) / TC (NI, IT, SS, TCR, heat) / Mode I
– Power range: 1 W-230W (VW) / 10-230W (TC)
– Input voltage: 6.4V-8.4V
– Output voltage: 0.5V-8.2V
– Battery: two cells 18650
– Cooking time: 0.001s
– Charging port: Type C
– Charging voltage: 5V
– Charging Current: 2.0A
– Standby current: <400uA
– Resistance Range: 0.1ohm-2.5ohm (VW) / 0.05ohm-2.0ohm (TC)
– temperature: 200 ° F-600 ° F / 100 ° C-315 ° C
– Display: 2.4 inch touchscreen

SMOK RPM 80 Pro Lite Specifications:

– Size: 24 x 58.5mm
– Capacity: 5 ml
– Filling: System Reset Top
– Material: Stainless Steel
– Coils: conical coil best Lite Mesh TFV16: 60-75W; TFV16 Lite mesh 0.15ohm double coil, better: 60-90W
– Re: plated gold thread 510

TFV Smok lite 16 is 24 mm in diameter and 58.5mm high this atomizer. With the atomizer is in the package, you will receive two tanks bubble and receive two coils.
atomizer construction quality is good, the wire is smooth and everything is as it should be. Previous you can see atomizer “Smok” and the bottom of the atomizer can see the “Designed by Smok”.

The spray is pre-installed Smok use drip and spray nozzle standard is not compatible with cards 510 or 810 drops would be a problem for some people. Leakage is acceptable to use in my opinion.

This is the charge of the atomizer and atomizer can see buttons for biasing the top cover. So when a button is pressed, you can push the envelope and see the fill hole. Fill a great void and have no problem to fill the tank. No leakage when the tank is filled.

This spray tank is equipped with bubbles and glass bubbles preinstalled will receive a replacement glass tank. Capacity glass tank with a capacity of 5 ml of large bubbles in my opinion. If desired, you can buy in the release of the atomizer 2 ml. I liked the glass bubble and I like the ability.

With the atomizer, you receive two coils. A coil is pre-installed, and the other is in the box. tfv16 integrated mesh coil bobbin Lite and works best cone 60-75w coil, the coil resistance is 0.2ohm. receiver coils in the package is a dual coil tfv16 net Lite and has the best resistance and work 0.15ohm 60-90w. Really you can easily replace the atomizer coil you need is out of the coil and a pulse in another, very simple and easy. In the coil, you can see the engraved lines so you can tell me filling the tank, which is good. It is used the first time that the coil has to start with a few drops of liquid E and can put a coil in the tank and filling the tank.

In the air flow control dial, you can see that the air flow in both places. In the air flow control dial, you can see some details that helps adjust the air flow and how much will be adjusted, will be the same on the other. You can easily adjust the airflow into the atomizer.

How does it work? And my mind atomizer:

Atomizer build quiality I received was very good, everything worked and the correct cable. With the atomizer, you receive two rollers and two glass bubble tanks were very good for me

smok mag grip also receive a standard preinstalled drops and the spray nozzle is not compatible with the advice 510 or 810 drops would be an idiot.

Top fill out this well and have not had any problems, fills a big gap and can fill up quickly and easily. Capacity is very good in my opinion and I think many will 5ml capacity. Using spray, which receives two rollers, one coil and other networks are dual coil threads. I tried a mesh coil and decent work, good taste, but I like the tank coil Tf better, and also gives a good flavor and excellent vapor production, this very strong vapor. Given all very busy aerosol that can be treated.

drawbacks:

– It is compatible with the 510 or 810 drip tips

Pro:

– The build quality is good
– facilitate filling system
– capacity of 5 ml
– The two glass bubbles tank
– Two coils
– The good taste
– dense vapor and steam production
– Easy to replace the coil
– Easy to adjust the airflow

Smok g priv 3 mod:

smok trinity alpha tank that feeds two 18650 and objects of this mod 1-230w formed.

Mod dimensions of 54 mm x 28 mm x 85 mm. mod build quality is very good and no complaints. I really like the design of mod, modern look very nice in my opinion, and you can buy this mod in 4 different colors. Mod does not have sharp edges and mod is very comfortable to use. You can also see some details about the mod, mod ahead, you can see “Smok” and behind the mod, you can see the “G-3 PRIV” with little information.

On the upper side of the mod, you can see the connecting thread here is good and I had no problem pin, silver and gold in the spring. This model can be used up to 25 mm in diameter without false atomizers.

On the back side of the mod, you can see the battery cover and, as it says the device is powered by two batteries 18650. The remnants of the battery cover in place because of the magnet and fixed in place, n ‘there is nothing to play very well. At the bottom of the platform, you can see a small slot so you can pull nails. If the battery cover is removed, you can see the battery in the orientation painted and here we also have a group so that you can make the battery more easily. When the battery is placed in the current model is no model and excellent crackling agitation.

Sub mod can see the ventilation holes and a USB port c.
You can use the USB port for software updates and can be used to recharge the battery for a balanced load this enhancement. As always, I recommend you to charge the batteries in an external charger.

On one side of the mod, you can see the shutter button. trigger on this device is very large and dislocation, it works very well. I like the shutter button and I think it is very convenient to use. On top of the shutter button, you can see another button is used to activate / deactivate the screen lock / unlock the screen.

On the front you can see the touch screen mod really, really big screen, 2.4inch screen size. I think this is a nice screen and the brightness of the screen is good.

To activate it, you must click the trigger five times and had to do the same to turn it off. When the power mode is activated will appear:

– I can not
– locking / unlocking
– The battery indicator
– Heat
– W
– a puff
– Left and right
– Resistance Coil
– V
– against stroke

Thus, on the screen, we have all the necessary information and it is a big high definition screen with good brightness, because you can see everything that is good on the screen. The touch screen works very well and did not have any issues.
In the Insert menu, you can see:

– Modus
– My Style
– Hojaldre
– Settings

After selecting the mode in which you can see:

– Vw
Heat: soft, standard, high, max
watt

– Tc
Ingredients: o, t, ss
TCR
Preheat

If you choose me mode, you can set up four different operating modes, you can select a rule, the heating fluid and may be written and network cards.
Choosing puff puff, you can rearrange the tables and can set the maximum drag.
If you choose the settings you can see:

– General (of the factory, accessibility, food)
– Chip (Info)
– Theme (you can choose the color and screen timeout)
– Access codes

How do these devices work and my thoughts:

G 3 PRIV is my opinion that another mod is very nice with smok nfix pods build quality is very good and everything is as it should be, feels very solid in the hand model.

Mod has no sharp edges and convenient to use in my opinion. I like the trigger and the trigger in my opinion is very comfortable to use, smooth now. This model can be used up to 25 mm diameter without false atomizers. This mod is a fingerprint magnet would be a disadvantage for some people. Mod USB port and the balance of support costs c much needed, but as usual, I recommend using an external charger. Here, the screen is very good, is the size of the display of 2.4-inch touch screen and it works great, I have not had any problems so far. The screen brightness is also very nice and the screen, we have a lot of information. We also have some interesting options here, we have the access code and can choose the color on the screen.
Above the shutter button, there is a button that allows you to lock / unlock the screen and enable / disable the screen. The battery cover is still perfectly in place and no play here, which is very good.
Mod is now very well and had no problem with this mod.
I really like this mod and mod work largely without problems so far, so I recommend this mod if you want to buy a mod touch screen.

deficiency:

– fingerprint magnet

Pro:

– Quality of building a good mod
– I like the mod design
– comfortable to use
– button located above the shutter button
– I like the shutter button
– 2.4 inch HD touch screen
– Good display brightness
– Much of the information on the screen
– Easy to use
– The touch screen works well
– You can change the colors on the screen
– balanced load
– Battey is the perfect cover up
– My selection method
– Access codes
– No ring
– tape so that you can easily remove the most battery

Thank you health cabin

You can buy the smok tanks here: https://www.vapeciga.com/collections/smok

smok atomizer coils rpm80 pods mod alpha coils nfix kit comment

smok rpm80 pro replacement pods sticks come in 18 colors:

– black with white foam
– Black with red spray
– green jet black
– Rasta red
– Green Rasta
– Color Belgium
– White
– Orange
– Red
– Black
– Red Camouflage
– camouflage
– H.H
– Gold
– Green
– blue
– Purple
– 7 colors

In the frame:

– Battery Sticks Prince
– Deposit TFV12 Prince (2 ml)
– Quadruple coil 0.17ohm M4 (pre-installed)
– Quadruple 0.17ohm M4 Coil
– USB Cable
– User’s guide
– Room
– Certification

As we wait for smok nord coils, this device can be purchased in beautiful color combinations are different, which is always a plus. I received this camera in rasta colors is beautiful, I love the colors on my device, it looks great. good quality with good details about the device. quality color looks good, the moment I see no scratches on the battery or atomizer, there are scratches on the bottom of the battery to the sitting at the table and no scratches on the above battery atomizer and I think the quality of a good color

So, let me start at the top, Smok Prince tfv12.

– capacity of the tank: 2 ml

– Size: 63 mm

– Diameter: 25.5mm

– Weight: 63g

Atomizer is the same color as the top of the battery and goes well with the battery. smok mag modprince is a very nice looking atomizer.

Smok tfv12 above, you can see the tip 810 drops by two O-rings in it, drip is in good condition. This is just the tip of Cobra falls and looks absolutely beautiful. It can be purchased separately at the end of the drops and you can choose from several different colors. Drip Tip convenient to use. Here you can use all of the 810 late fall or two rings on it.
the outer diameter of the tip of the drop is 16 mm, the inner diameter is 12.5 mm.

sophisticated drops below, you can see the spray cap fills. This tank is filled very easily, on the deck, you can see a small lock button and open the top cover. If you want to fill your tank, you just press the button and slide the top cover, slide the top cover on one side and you can see the hole you use to fill your tank. I love and the same locking system that can be very easy and quick to fill my tank.

You can see some details here, you can see engraved “Smok” can be seen at the lower end of the crown of fine droplets and the crown of the same ring, you can see the flow of air, beautiful detail, truth.

Tank capacity of 2 ml to questions from the European Union and the European Union have problems. Standard Editon including glass bubbles and spray glass looks better bubbles. I really like the fact that you can choose between the bubble and ordinary glass tank. Capacity 8 ml Bubble tank is very good. You can also buy separate single bubble tank.
In all of the standard edition, you will be saving a glass tank, but the question of the EU in the package there is no replacement of the glass tank.
Up and down, you can see the ring with a glass very well and the package will receive two O rings to the tank in another color.

Discussion on the base and the fireplace where the loot you runs great, you can screw your gently rolls.

air flow control ring work is very nice and has a grip on both sides, you can easily adjust the airflow to your liking. Here you can see two holes for airflow, allowing you to customize the one hand, it will be the same on the other side. Once fully open ariflow lots of air, I use this air flow atomizer open, taste better, in my opinion, when the air flow is an open environment.

below, you can see tfv12 510 unregulated Smok pin and thread here is good too. You can also see engraved “Designed by Smok”
Using the spray, you receive two coils, the coil will be pre-installed and the other in the package. Both the same coil, the coil resistance 0.17ohm m4 can be used between 30-70w and Smok said reels work best between the two coils nominal 40-60W.

E Liquid I, im using 70-30% works well vg-reel pg, the axis is excellent and there are no lumps, and no leakage. very tasteful and you can expect a lot of steam here. With this coil, as with the other coil when it is screwed on the basis of the need to send an email from liquid coil options, so the drop is avoided. For this coil, I recommend you start with a very good, especially if the battery is fully charged.

For Prince smok trinity alpha coils head coil RBA buy separately and can be built here is very simple, I do not have the head of the coil, but I’ll sure buy.

Prince battery stick

Honestly, I am very pleased that when I received this device as a battery looks very good in my opinion. I think this device will be very convenient to use and he was right. The device is extremely compact, 85 mm pile height, diameter of 24.5 mm and batteries a little room at all, just 88.5g. Battery feels good in the hand.

 

You can see the nice details of the battery as well. Basically, you can see engraved “Smok” and the other side you can see engraved “Palos Prince.” Further down the battery, you can see the design of the crown, the same as in the atomizer. From the bottom you can see the ventilation holes.
gold plated pins on the battery and spring loaded.

Triggers are very comfortable and a hexagonal shape. With easy to press the shutter button to spray, because it is always the trigger. Around the trigger, and the LED light will glow red when pressed back spray. A red light show because of color around the shutter button, but for example with a yellow light yellow light around the button.
You can easily rely on shooting with the index finger or thumb, I want to use it with my mother, who feel more comfortable with me.

You can see the USB port on the battery, the current 0.8 A max. You can also see the light to do the same thing here, but it glows white.
3000mAh battery capacity, there are 23,600 batteries in the device. excellent battery capacity and I find information about the actual capacity of 3000mAh.
With this capability depends on the resistance of the coil, which can certainly use these devices 1-2 days without recharging the battery.
You can use the device while in the charger, but still, I would suggest not vape when the battery is being charged, the battery will be longer.

LED flashes 15 times when the battery is empty and you need to recharge the battery.
When a device on the charger lights red when the battery is fully charged the light will be.

 

Is a device that is very easy to use, you can be activated by 5 Click the shutter button and can be deactivated by 5 Click the shutter button.
These batteries operate from 3.4-4.2volts, which basically means that when the battery is fully charged, will have more power.
I use these batteries with different repositories, so that the battery 24 mm in diameter, 24.5mm tank will integrate very well here and there will not be a problem. Honestly atomizers used in this document under 24 mm and I’m fine with it.

This battery works well with my dl droppers and works very well with my smok nfix kit

Some of the information that this tool works with different resistance for exaple:

– With the coil resistance of 1 ohm, power will be between 13-16w, according to the battery capacity
– The resistance of the coil 0.17ohm, the output power is between 62-78w, according to the battery capacity
– The resistance of the coil 0.12ohm, the output power is between 78-92w, according to the battery capacity

Of course, in these devices, we have some protection:
– Low voltage protection
– Cutting 8 seconds
– Short Circuit Protection
If the unit can not recognize the atomizer leads to flash four times.

I like that the battery can use different tanks with excellent resistance, I really like how it works and my device such as battery capacity, 3000mAh thought it might be good for each user. Maybe I want to add 3 different lights on the battery indicator, because I want to, everything else here is very good and I am very happy with the battery and tfv12, although we all know Smok coil. I recommend this device, because of the capacity and quality of construction that can be enjoyed for a long time.

You can buy You are here: smok vape atomizer

 

smok vaporizers nord rpm pro mag trinity nfix coils comment

smok nord2 kit comes in 18 colors:

– black with white foam
– Black with red spray
– jet black green
– Rasta red
– Rasta Green
– Color Belgium
– White
– Orange
– Red
– Black
– Red Camouflage
– camouflage
– H.H
– Gold
– Green
– blue
– Purple
– 7 colors

In the box:

– Batteries Stick Prince
– Deposit TFV12 Prince (2 ml)
– Quadruple coil 0.17ohm M4 (pre-installed)
– Quadruple 0.17ohm M4 coil
– USB cable
– Manual
– Spare parts
– CertificationAs we wait for rpm80 pro battery, this device can be purchased in many different combinations of beautiful color

which it is always an advantage. I received this device in beautiful colored rasta I like the colors on my device, it looks great. Build quality is good with nice details on the device. quality color looks good, see what I can now no scratches on the battery or atomizer, still no scratches on the bottom of the following battery sitting at the table and no scratches on the battery housing of the atomizer, so I think the color quality is good.

So, let me start at the top, Smok Prince tfv12.

 

– the capacity of the tank: 2 ml
– Size: 63 mm
– Diameter: 25.5mm
– Weight: 63g

 

Atomizer is the same color as the top of the battery and that goes very well with the battery. Smok tvf12 prince is a very good atomizer.

On top of smok mag 225w you can see 810 advanced drip or two rings at its tip, drip well inside.

What the board and the emergence of new cost drip very nice. It can be purchased separately that drop by drop and trick you can choose from several different colors. drip tip is comfortable to use. Here you can use another striker or two rings 810 drops on it.
outer diameter of the hub dropwise 16 mm, an inner diameter of 12.5 mm.

Drops below, you can see the top cover and syringes high filling. Fill the tank is very easy, on the deck, you can see the small lock button and release the top cover. If you want to fill your tank, just press the button and slide the top cover, the top cover will slide to one side and you can see the hole, you will use to fill your tank. I like the same locking system and because I can very easily and quickly fill my tank.

You can see some details here, you can see engraved “Smok” can be seen at the bottom of the crown of fine droplets and the crown of the same ring, you can see the air flow, beautiful details, the truth.

a tank capacity of 2 ml to questions from the European Union and the European Union have problems. Editon standard including glass bubbles and glass looks spray best bubbles. I really like the fact that you can choose between the bubble and the usual glass tank. Bubble 8 ml capacity of the tank is very good. You can also buy single bubble reservoir separately.
In all of the standard edition, you receive backup from a glass tank, but the question of the EU in the package there is no replacement of the glass tank.
Up and down, the ring can be seen with the glass very well and receive two O rings to the tank in another color package.

Discussion of basic and where treasures rolls very good, fireplaces can spoil your rolls smoothly.

working control ring airflow is very nice and has a plug on both sides, you can easily adjust the airflow to your liking. Here you can see two holes for airflow, allowing you to customize the one hand, it will be the same on the other side. When fully open ariflow there are plenty of air, I use this open atomizing air flow, taste better in my opinion, when the airflow is a means of communication open.

Here you can see Smok tfv12 pin 510 is not set and the thread here is also good. You can also see engraved “Designed by Smok”

Using the spray, you receive two coils, will be pre-installed coil and the other in the package. Both the same coil, the coil resistance 0.17ohm m4, can be used between Smok 30-70w and said coils are best run between the two coils nominal 40-60W.

Liquid E I, im using vg-reel pg 70-30% works well, the shaft is excellent and there are no lumps, and no leakage. very good taste and you can expect a lot of steam here. With this coil, as with the other coil when screwed on the basis of the need for the coil with the selection of liquid email, so the fall is prevented. For this coil, I recommend starting with a very good, especially if the battery is fully charged.

For Prince smok trinity alpha price head coil RBA purchase separately and can be built here are very simple, I do not have a head coil, but I’m sure going to buy.

Prince battery stick

Honestly, I am very pleased that when I received this device as a battery looks very good in my opinion. I think this device will be very convenient to use and he was right. The device is extremely compact, stack height of 85 mm, diameter 24.5 mm, and the battery is not complicated at all, just 88.5g. Battery feels good in the hand.

You can see the nice details of the battery as well. Basically, you can see engraved “Smok” and the other side you can see engraved “Palos Prince.” Further down the battery, you can see the design of the crown, the same as in the atomizer. From the bottom you can see the ventilation holes.
pin plated with gold on the battery and spring.

Shutter button is very convenient and a hexagonal shape. easily hold the shutter button to spray, as always the trigger. Around the shutter button, LED light, and the light turns red whenever the dismissal of a vaporizer is pressed. A light shows red because the color around the shutter button, but for example with a yellow light around the button on a yellow flame.
You can easily press the shoot with the index finger or thumb, I want to use with my mother, who feel more comfortable with me.

You can see the USB port on the battery, 0.8 A max. You can also see the light to do the same here, but will glow white.
3000mAh battery capacity, there are 23,600 batteries in the device. excellent battery capacity and I find information about the actual capacity of 3000mAh.
With this capability depends on the resistance of the coil, which can certainly use these devices 1-2 days without recharging the battery.
You can use the device while in the charger, but I suggest not VAPE when the battery is charged, the battery will be longer.

LED flashes 15 times when the battery is empty and you need to recharge the battery.
When a device on the charger lights red when the battery is fully charged the light will be.

Is a device that is very easy to use, you can be activated by 5 Click the shutter button and can be deactivated by 5 Click the shutter button.
These batteries operate from 3.4-4.2volts, which basically means that when the battery is fully charged, will have more power.

I use these batteries with a different repository, so that the battery of 24 mm diameter, 24.5mm tank will integrate very well here and there will not be a problem. Honestly atomizers used in this document under 24 mm and I’m fine with it.

This battery works well with my dl droppers and works very well with smok nfix coils.

Some of the information that this tool works with a different resistance for exaple:

– With the coil resistance of 1 ohm, the power will be between 13-16w, depending on the battery capacity
– With 0.17ohm coil resistance, output power is between 62-78w, depending on the battery capacity
– With 0.12ohm coil resistance, output power is between 78-92w, depending on the battery capacity

Of course, these devices have some protection:
– Low-voltage protection
– cutting 8 seconds
– Short-circuit protection
If the unit can not recognize the atomizer he led flashing four times.

I like that with these batteries may use different tanks with excellent resistance, I really like how it works and my device, such as battery capacity, 3000mAh thought it might be good for each user. Maybe I want to add 3 different lights on the battery indicator, because I want to, everything else here is great and I am very happy with the battery and tfv12, so all we know of Smok coil. I recommend this device because the capacity and quality of construction that can be enjoyed for a long time.

You can buy You are here: smok vaporizers

 

This review of smok vape coils rpm80 mag trinity nfix kit

I have a smok nord coils cabins health for the purposes of this review.

Smok g PRIV three colors:

– PRISM chromium
– Black
– Red
– Gold Prisma

Smok-g mod locking 3 specification

– Size: 54 x 28 x 85 mm
– Chip: IQ-G chipset
– Operation: VW (standard screen, hard, Max) / TC (NI, IT, SS, TCR, heat) / Mode I
– Energy range: 1 W-230W (VW) / 10-230W (TC)
– Input voltage: 6.4V 8.4V-
– Output voltage: 0.5V-8.2V
– Battery: two cells 18650
– Cooking time: 0.001s
– Charging port: Type C
– Charging voltage: 5V
– Charging Current: 2.0A
– Standby current: <400uA
– Resistance Range: 0.1ohm-2.5ohm (VW) / 0.05ohm-2.0ohm (TC)
– temperature: 200 ° F-600 ° F / 100 ° C-315 ° C
– Display: 2.4 inch touchscreen

Smok tank tfv16 Lite Specifications:

 

– Size: 24 x 58.5mm
– Capacity: 5 ml
– Filling: Top Refill System
– Material: Stainless Steel
– Coils: conical coil best Lite Mesh TFV16: 60-75W; TFV16 Lite mesh 0.15ohm double coil, better: 60-90W
– Re: gold over 510

TFV Smok lite 16 is 24 mm and height 58.5mm this atomizer. With the atomizer is in the package, you will receive two tanks bubbles and receives two coils.
atomizer good build quality, the yarn is fine and everything is as it should be. Previously, you could see atomizer “Smok” and the bottom of the atomizer can see the “Designed by Smok”.

Using the jet is pre-installed Smok drip and spray nozzle is not compatible with standard 510 or 810 drops board would be a disadvantage for some people. Leaks are acceptable for use in my opinion.

It is the responsibility of the atomizer and atomizer can see poppers to push the top cover. Therefore, when the button is pressed, you can push the envelope and see the void filler. Fill a great void and you will have no problem to fill the tank. No leakage when the tank is filled.

This tank sprayer with glass bubbles and bubble wrap is installed, you will receive a replacement for glass tank. glass tank with a capacity of large bubbles of 5 ml capacity, in my opinion. If desired, you can buy in the release of 2 ml atomizer. I like a glass bubble and I like capabilities.

With the atomizer, you receive smok trinity alpha coils.

\

A coil is pre-installed, and the other is in the box. tfv16 Lite integrated coil bobbin and the coil mesh cone 60-75w work best, the resistance coil to 0.2ohm. receiving coils in the package is a double net tfv16 Lite coil and has the durability and work 0.15ohm 60-90w. Really can easily replace the atomizer coil you need is out of the coil and pulse Moreover, it is very simple and easy. Reels, you can see the engraved lines so you can tell me filling the tank, which is good. The first time the coil you must first few drops of liquid E and can put a coil in the tank and fill the tank used.

In the control line of air flow, it can be seen that the air flowing in both locations. In the control dial airflow, you can see some details that help regulate the air flow and a portion will be adjusted, will be the same on the other side. You can easily adjust the air flow to the atomizer.

How it works? And my mind Atomizer:

Atomizer build quiality I received was good, everything worked and the right cable. With the atomizer, you receive two rollers and two glass bubble tanks very good in my opinion. Smok Receive also installed by gout and gout standard nozzle spraying is not compatible with the 510 or 810 drops suggestion would be an idiot. Top Fill out this well and had no problem filling a void and fill quickly and easily. Capacity is very good in my opinion, and I think many will the 5ml capacity. receive spray use two coils, one coil and another network double coil wire. I tried coil mesh and decent work, good taste, but I like the tank coil Tf better, and also provide a good and excellent vapor production, this powerful steam taste. Given all busy aerosols that can be treated.

 

deficiency:

– It is compatible with the 510 or 810 drip tips

smok rpm80 pro replacement pods:

 

– The build quality is good

– facilitate filling system

– capacity of 5 ml

– Two glass bubbles tank

– Two coils

– The good taste

– dense vapor and steam production

– Easy to replace the coil

– Easy to adjust the airflow

 

smok mag mod

Smok g priv mod 3 feeding two 18650 and the subject of this formed 1-230w mod. Mod dimensions of 54 mm x 28 mm x 85 mm. mod construction quality is very good and no complaints. I really like the design of the mod, modern look very nice in my opinion, and you can buy this mod in 4 different colors. Mod has no sharp edges and mod is very convenient to use. You can also see some details about the mod, mod before, you can see “Smok” and behind the mod, you can see the “G-3 PRIV” with little information.

On the upper side of the mod, you can see the thread connection here was good and had no problem pin, silver and gold spring. This mod, you can use up to 25 mm in diameter without atomizers false.

 

On the back side of the mod, you can see the battery cover and as said device is powered by two batteries 18650 Remnants of the battery cover in place because the magnet and the remains of both situation does not play that’s good. At the bottom of the deck, you can see a small slot so you can pull nails. If the battery cover is removed, you can see the orientation of the battery in painting and also have a band here so you can make simple battery. When the battery is inserted into the mod and mod when it is not very good Sizzling stir.

From below you can see the ventilation holes MOD and USB port c.
You can use the USB port for software updates and can be used to charge your batteries for this auxiliary device load balanced. As always I recommend to charge your batteries in an external charger.

On one side of the mod you can see the shutter button. the shutter button on the device is very large and dislocation, which works very well. I like the shutter button and I think it is very convenient to use. Above the shutter button you can see the buttons used to turn on / off screen and lock / unlock the screen.

On the front you can see the mod touch screen that I really like, really big screen, 2.4inch screen size. I think this is a very good screen and the screen brightness is good.

To activate the device must click the shutter button 5 times and must do the same to turn it off. When the device is on the display mode:

– I can not
– lock and unlock
– The battery indicator
– hot
– W
– Time hojaldre
– Left and right
– coil resistance
– V
– Cons Puff

 

So, on the screen we have all the information we need and this is a big high definition screen with good brightness, because you can see everything that is good on the screen. touch screen works very well and had no problems so far.
At the entrance of the menu you can see:

– Modus
– my way
– Hojaldre
– Setting

When the selected mode, where you can see:

– Vw
Pre-heat: mild, normal, hard, at the least
watt

– Tc
Materials: Ni, Ti, ss
TCR
Preheat

 

If you choose me mode, you can set up four different operating modes, you can select a rule, pre-heat the liquid and can be written using and NIC.
If you can choose puff puff I reset the counter and can set the maximum punch.
If you choose the settings you can see:

– General (approximately factory reset, accessibility, food)
– Chip (Info)
– Theme (you can choose the color and screen timeout)
– Access codes

 

How do these devices work and my thoughts:

smok nfix kit is my opinion that another mod is very nice with Smok.

mod build quality is very good and everything is as it should be, mod feels very solid in the hand. Mod has no sharp edges and easy to use, in my opinion. I like the shutter button and in my opinion, the trigger is very convenient to use, works well for now. This model can be used up to 25 mm diameter nozzles without false. This mod is a fingerprint magnet will be a disadvantage for some people. Mod c has a load of the USB port and supports balanced than many would like, but still recommend using an external charger. The screen here is really good, size is a 2.4-inch touch screen and works very well, I have not had any problems so far. The screen brightness is also very nice and shows us a lot of information. We also have some interesting options here, we have an access code and you can choose the color on the screen.
Above the shutter button is a button that allows you to lock / unlock the screen and enable / disable screen. The battery cover is held in place perfectly and there was no play here, which is very good.
Mod now fine and had no problems with this mod.
I really like this mod and mod works mostly without any problems so far, so I can recommend this mod if you want to buy a mod touch screen.

disadvantages:

– fingerprint magnet

 

Pro:

– The quality of construction good mod
– I like the design model
– comfortable to use
– button above the shutter button
– I like the shutter button
– touch screen HD 2.4 inch
– Good display brightness
– Lots of information on the screen
– Easy to use
– The touch screen works well
– You can change the colors on the screen
– Load balancing
– Battey cover keeps perfectly in place
– My selection method
– Access code
– No ring
– tape so that you can easily remove the most battery

 

Thanks health cabin

You can buy the here: smok vape atomizer

This review of smok vape battery starter coils mag trinity nfix

The smok nord starter kit and Mod Pod Pro Kit is the newest and the first products made of Smok 2020. In the past, 2019, Smok industry as the leading manufacturer vaporizer take the first step and introduce new and innovative pod kit models – Smok RPM40 which swept the world quickly. The Smok RPM40 still very popular in the market, and certainly the kit mod pod greater success. RPM80 RPM80 and the Pro version is an enhanced and more powerful than Smok RPM40 Mod Pod Kit, which is marketed as the next game-changer in the field.

 

smok mag p3 and the difference between Pro is the battery type. The construction and design of them are the same. The Smok RPM80 powered by an integrated battery and 3000mAh RPM80 Pro is powered by a 18650 battery (sold separately). The shorter than RPM80 RPM80 Pro Mod Pod Kit due to the internal battery.

Price: £ 35.99 (RPM80) / £ 32.99 (RPM80 Pro)

Color: Black Stabilize, Wood stabilizing red liquid gold, liquid blue, white and black resin, 7 colors, black carbon fiber

RPM80 Smok:

Size: 109 x 31.55 x 26mm
Capacity: 5 ml / 2 ml (TPD)
Battery: 3000mAh
Output Power: 1 – 80W
Resistance: 0.4Ω / 0.17Ω
the output voltage: 0.5V-4.0V
Smok RPM80 Pro:

Size: 118 x 31,5 x 26 mm
Capacity: 5 ml / 2 ml (TPD)
Battery: 18650 individual (not included)
Output Power: 1 – 80W
Resistance: 0.4Ω / 0.17Ω
the output voltage: 0.5V-4.0V
1 x RPM80 RPM80 Tools or Pro Tools
Pod 1 x RPM80 RPM (0.4ohm coil installed Mesh)
1 x RPM80 RGC Pod (RGC Mesh 0.17ohm conical spindle is supported by nexmesh I preinstalled)
1 x USB cable
1 x Manual
quality construction and design RPM80 RPM and 80 Pro

The Smok RPM80 RPM80 and Mod Pod Kit Pro is upgraded to the level of pioneer RPM40, which has an attractive and elegant design. Much higher and wider than the precious RPM40 kit, which is as big as most of the pod mod kits on the market. Construction zinc alloy, solid Kit and solid. modeling of both sides are well designed to get them.
intuitive environment fire button, a screen and a USB port that is in front of the mod.

RPM80 is powered by a 3000mAh battery and a full Pro 18650 RPM is powered by batteries (not included). System Pro RPM80 RPM80 single dose Smok combine the portability and flexibility of the Mod, which makes them ideal for use and suitable for beginners. They have a dual air flow system and form a VW / VV reversible. You can adjust the output power of 80W 1W. With a brand new set of CI-80 chips, which Smok and RPM80 RPM80 Pro has been updated many components of the original RPM40, offers a variety of intelligent functions and protecting security.

The smok trinity alpha battery replacement launches new 0.17ohm conical mesh and CER. Pod networks coil having WCR inverted funnel, that can choke and flavor compression and steam directly in taste to improve flavor.

Mod Smok RPM80 RPM & 80 Pro

The RPM80 and Smok Pro provides a simple and fast interface. Whether you are a beginner or an experienced Vaper, you can easily use and enjoy your vaping. 0.96-inch screen with important new data shows the user interface design vaping. Integrated internal and external 3000mAh battery warranty 18650 can only rule that lasted for one day. The door to the push-pull RPM80 Pro battery is designed for easy battery replacement. You can adjust the power range 5 – 80W and pressing.

IQ-80 advanced chipset offers a variety of intelligent functions and safety protections, such as the recognition of intelligent atomizer, puff monitoring system, 10 Sec protection circuit switching, short, heat protection, low battery warning.

Pod Smok RPM80 RPM & 80 Pro

You will get two different pod cartridge coil package with another substitute – RPM Smok smok pod and pod CER

smok nfix kit price compatible with the original series. The POD RGC in correspondence with innovative cone NexMesh 0.17ohm coil which is pre-installed. The two pods can contain a maximum of 5 ml e liquid.

RGC module has an adjustable design air flow downwards, which is the first module with an adjustable airflow with Smok. The air flow rate into the base ring can be rotated to adjust the air flow inlets.

Any new thread spool cone technology 0.17ohm RGC nexMesh supported by the structure and the innovative special cone, which can expand and compress the water vapor from the air inlet flow during passage through the coil the end of the drops. The conical mesh coil RGC designed to receive the steam generating water groove is strong and hot, high and dense with unparalleled flavor burst. 0.17ohm resistance heating coil with fast, giving you vape experience more. RPM RBA RBA coil and coil RGC will also be available for Pod, sold separately. RBA package, making it easy to build.

End RPM80 Pod:

Remove the rubber plug and fill the slot revealed
Pour your favorite e-liquid in the charging port
firmly press the rubber stopper
If you use a coil for the first time, you must wait at least 5 minutes to get the fully saturated coil
RPM80 RPM and 80 Pro Review

The Smok RPM80 RPM and 80 Pro is an enhanced version of the original RPM40. They have a battery and output power is stronger. The maximum power of 80W more than enough to mod pod. Update IQ80 RPM80 new chip makes the series stand out because it offers smart features and security for a larger force. RPM80 RPM80 and flavors Pro is very good and very upscale. Brand new RPM80 RGC Pod offers adjustable air flow and use RGC Mesh 0.17ohm support cone coil 80W to heat and intense flavor with a large steam.

RPM80 RPM Pod is compatible with smok rpm80 pro coils. If you are looking for a portable and functional device, I highly recommend trying Smok RPM80 series. He will never disappoint!

Advantages and disadvantages of Smok RPM80 RPM and 80 Pro:
Pro:

Good build quality
Strong vaping long battery life
IQ80 newly developed chip set, a kind of security protection
watt improvement
Easy to use, even for new Vaper
taste very good and strong and hot steam
New RGC Pod has an adjustable air flow and the use of mesh cone 0.17ohm RGC
deficiency:

the battery cover off Smok RPM80 Pro
Below the screen brightness
higher in price than RPM40 that

Now, for example, if you want to change the settings in the power mode, you must click 3 times on the shutter button and select watts and hold the shutter button, you can adjust the power and brilliance, of course, you can adjust the power on the main screen with the plus and minus button.
From the menu, you can also reset the counters puff, or you can set the meter.
You can change the color of the time display and the display. These devices have 6 colors available, you can choose from blue, pink, orange, red, white or green.
Then you can change the color of the LED lights and can also change the style of light. You can choose from 12 colors are available in the photo you can see the colors.
As I said, you can change the style of light and you can choose between normal mode, flash and style faded.
You can also choose when the lights twinkling LED, you can be punished shine when vaping, when the screen is on, or can be set to shine all the time. Of course, you can turn off the lights.
To disable it, you must go to the menu and you have to find another option for a little unusual.

When the device is activated, with 5 Click and locked when the shutter button is locked, you can not use the device.
Every time you change the atomizer, you are asked whether new or old reels and see the resistance of the coil before and a new coil.

Smok Poison works very well in this chip is very nice and it was pretty accurate, I can not say a bad thing, the quality is good. The screen is bright and big and I loved it. Honestly, I want to use this mod with LED lights off, but I think people will love the features, looks good and interesting, sometimes I turn on the light and I admit, it looks amazing. I also like the fact that you can turn off the LED light, so if you love the features that you would use if you do not like, you can always turn it off, but you can not turn off the LED light inside the atomizer. If the LED lights as surely love this mod.
Another advantage is that the balance in favor of charging models. In this device, you can manage all the mod has so many good features, even more than necessary, which is a big advantage. This device is particularly suitable for dual battery model and I really like the shutter button.

As we all know, is Smok companies are now producing high quality equipment and well atomiser mod chip does not disappoint and was very good, in my opinion, this is a very good tool.

You can buy it here: vape battery

 

With the review of the e-cigarettes under the smok brand

Smok nord 2 come in several different colors:

– Blue red
– black Amarillo
– Black red
– Silver Black
– Red Gold
– crimson
– 7 colors

In the package:

– Poison MOD
– Deposit TFV8 Big Baby Light Edition (5 ml)
– Basic Baby-Q2 V8 (double coil 0.4ohm) (pre-installed)
– Basic Baby-T8 V8 (0.15ohm eight rolls)
– replacing glass tubes
– 6 pairs of color O-ring
– USB Cable
– User’s Guide
– Bedrooms
– Warranty card
– Warning Map

RPM80 Pro

 

Smok mag is a very nice and clear designed device with a great edition tfv8 baby looks good atomizer. a design very attractive with many details, especially on this device brands mod is very different. The most interesting is that the atomiser mod and we can see a lot of LED lights. It is even possible to change the color of the lights, but we’ll talk soon.

 

In the box, you get a lot, you will receive a infants light tfv8 mod edition Poison, two coils and everything you need, but also in the package you receive or ring that can be used to change the color of the LED light on the atomizer and two rings of beauty, again, a very nice together.

I received this SMOK Nfix Kit 25W in 7 colors, this is subjective, but I like the way it looks, of course, you can buy this product in different color options.

build quality is good, everything is as it should be. color quality is also very good, Smok improved and so far I do not see scratches on the mod or spray and use it every day at home and out of me, for now all is fine.

 

Baby light edition Tfv8 fan

 

atomizer diameter was 24.5 mm, height 56 ​​mm and weighs 60 g. Is atomized steel fly.

Baby tfv8 atomizer is great, but a little different, this one is lighter and has brought the matter to light, so that when the spray shine spray. In the atomizer, which is led by a white light, but if you want to change the color of light that can be used or voice packages and change. For example, if you replace the O-ring blue when spraying aerosol blue light. The build quality is very good, very good yarn, and can not say anything about the poor quality of construction.

In addition to the extreme oscillations atomizer with two O-ring on it. Council to impose a very good initial decline. Top real point drops, the magnitude of the falling edge: height is 19 mm and 15 mm, I think it would be easier to use.
Under the continued downturn drop, you can see the spray filling cap is superior. filling it is very popular and very easy to use. All you need to do is to push the envelope and see the hole where the tank is filled, you can fill up very quickly, I loved it.
In the upper lid, you can look on the record “Smok” and can view details recorded unscrewing using a plug for changing the coil or for cleaning the sprayer.

Burning and grounds were very nice and clean. From the bottom of the base, you can see engraved “Designed by Smok”.
Basically, you can see the ring controls the flow of air in the ring and you can also see the same details as in the upper deck and the details of help when you want to adjust the air flow. good air flow ring, can adjust the air flow is very precise, and can not move randomly. Ring stop air flow and can not run forever, I want to see the top of the atomizer. Sprays have two holes on each side of the air flow and slip one hand, it will be the same on the other side. Stream soft and hard to see.

5 ml reservoir capacity, but the rules of the European Union, you can buy a container of 2 ml. It can be purchased separately for the glass bubble atomizer and capacity will 7ml glass. I like that it is possible to expand the capacity of the atomizer. There is no glass bubble in the package, but you will get a glass a backup if you violate any of these. Or two rings have good reservoir.

Generally, you will also receive two coils. A coil is a core Q2 baby v8, resistance is 0.4ohm coil and the coil is installed, the electrical coil 40-80w recommended for this, but it would be better to use between 55-65w. Another receiving coil baby-T8 and V8 coil core package resistance is 0.15ohm 50-110w recommended for coil power, but it would be better to use between 60-80w.
I always like to say, before filling the tank and spray, you must first start with a few drops of liquid coil, and then fill the tank and ready for drying vape without success.

Tvf8 edition big baby light spray works very well, either by electronic liquid discharge (vg-pg 70-30), so there is no leak, there is really no problem with this atomizer at all. steam production is very good with this tank, you can definitely enjoy if you want to chase the clouds. It feels so good, can not say anything bad taste

Smok trinity alpha

This mod is a double mod 18650 and you can see the LED lights are beautiful and you can change the color of light.

Specification:

power range: 1-225w
Size: 86 mm x 47 mm x 30 mm
Weight: 180 g
Resistance Range: 0.1-2.5ohm (VW) /0.05-2.0ohm (TC)
Temperature range: 200F-600F / 100C-315C

 

Is shaped device is very nice and I like the way it feels in your hand.
At the top of the camera, you can see a spring pin gold plated 510. In the device, you can see many beautiful details and many LED lights, you can see two tasty details engraved on one side you can see engraved ” Smok “on the other side you can see the record of” poison “.

This device has a side of the fire-shaped button that was very nice and wanted to use the device with the power button on the side. the shutter button is also very large, but can be activated if the top is pressed. Anyway, it was very comfortable and the shutter button can touch with your finger or palm, it all depends on how the shutter button is pressed. the shutter button works well. Below the screen you can see the plus and minus buttons, very clicky button.

In this device, you can see the USB port, you can use this USB port to charge the battery or upgrade the software. Smok balance for charging, so you can charge your batteries here, but as usual, I suggest you use an external charger.

From the bottom of the camera, you can see the battery cover, it is difficult not open the door, I love the fact that the battery cover, you can see very clearly how you have to put the battery. The battery cover is a great place when the battery and battery safely inside, the door can not be accidentally opened. You can not hear a sound when the device is shaken.

Smok poison has a color screen is very large and beautiful, the screen size is 1 inch. The screen brightness is good and you can see everything very nice.

To activate the device, you must press the shutter button 5 times. After that, you will see “Smok” on the screen and you will see a version of the software.

When the device is activated, you will see on the screen:

– double the battery indicator
– Power (W)
– voltage
– coil resistance
– hot
– blow
– Time hojaldre

Thus, on the screen, you will see a lot of information, and if you ask me, is all you need, I must say I like the battery indicator on the screen.

When the shutter button is pressed three times the device will be on the menu and the menu can be seen:

– Mode settings
– the formation of the breath
– Configuration Screen
– diodes
– Deadly

To navigate the menu using the shutter button and the plus and minus buttons. To enter a submenu button is pressed much fire.

You can use the setting mode to choose the work mode:

– Power mod
– Ni Tc
– Te Ti
– TC SS
– Memory game

Now, for example, if you want to change settings in the power mode, you must click 3 times on the shutter button and select the watt and hold the button for the shutter, you can adjust the power and brightness, of course, You can adjust the power on the main screen with the plus and minus buttons.
From the menu, you can also reset the blow against, or you can set the limits of the meter.
You can change the time display color and display. These devices have 6 colors available, you can choose from blue, pink, orange, red, white or green.
Then you can change the color of the LED lights and can also change the style of light. You can choose from 12 colors are available in the picture you can see the colors.
As I said, you can change the style of light and you can choose between normal mode, the flash and faded style.
You can also choose when LED lights are bright, can be illuminated when vaping, when the screen is on, or you can set to shine all the time. Of course, you can turn off the lights.
To switch off, you must go to the menu and you must find the option that is another little practice.

When the device is activated by 5 Click the button and the shutter locks when locked, you can not use the device.
Each time you change the atomizer, wonders if the coil and see new or old coil resistance before and a new coil.

Smok poison worked well within the chip is very nice and it was pretty accurate, I can not say a bad thing, as good quality. The screen is bright and big and I love it. Honestly, I want to use this mod with LED lights off, but I think people will love the features, good looks and interesting, sometimes I turn on the light and I admit, it looks amazing. I also like the fact that you can turn off the LED light, so if you like the features you will use if you do not, you can always turn it off, but you can not turn off the LED lights inside the atomizer. If the LED lights up as surely love this mod.
Another advantage is that the balance in favor of charging models. In this device, you can manage all the mod has so many good features, even more than necessary, which is a great advantage. This device is well suited for dual battery model and really the next shot.

As we all know, is Smok a company that now manufactures high quality equipment and is atomised not disappoint and this mod chip is very good, in my opinion, this is a very good tool.

You can buy it here: smok vape